Log in
Search
Latest topics
» STUKA bomb dimentions neededby Gordinir8 Today at 5:23 am
» Indexing COX cylinders
by balogh Today at 1:10 am
» 1/2a Skyray plans?
by 944_Jim Yesterday at 10:14 pm
» Postage stamp backplates
by JPvelo Yesterday at 8:52 pm
» my attempt at making an exhaust throttle for Cox .049
by roddie Yesterday at 8:20 pm
» Another of C.T. engines cleaned ---- Cox Tee Dee .09 --- Just today (3/26/2024) more Cox parts
by sosam117 Yesterday at 6:58 pm
» Cosmic Winds, - Big Guy, Little Guys, Silver Guy and Wounded Guy.
by rsv1cox Yesterday at 5:18 pm
» My friend Ramón, his Cox .09 & Cox .010
by MauricioB Yesterday at 12:31 pm
» Introducing our Cox .049 TD Engines
by Cox International Yesterday at 12:27 pm
» Parts Cox TD-4
by rsv1cox Yesterday at 8:40 am
» On ebay a very special Cox engine
by davidll1984 Yesterday at 6:32 am
» Introducing the new - "QZ" RR-1
by Admin Yesterday at 12:51 am
Sky Cruiser
Page 1 of 1
Sky Cruiser
Hi everyone.I have another problem with My Sky Cruiser.Tower Hobbies is aware of this and is taking care of it.I dont like the gear system on the esc/servo board.I had the gear came off during flight and I lost the evevator.They r sending Me another board.If I keep having problems with it Im going to see if I can set up micro servos,esc and reciever of My choice.The plane flys real good.It just seems the gear set up is a problem.Has anyone else had this problem?
coupes4ever- Beginner Poster
- Posts : 5
Join date : 2013-06-21
Re: Sky Cruiser
The gears on both servos keep coming off during flight.I tried putting a little loctite on but no good.Anyone have any Idea besides changing all the guts and putting real servos in.
coupes4ever- Beginner Poster
- Posts : 5
Join date : 2013-06-21
re: gears coming off servo of sky cruiser
coupes4ever wrote:The gears on both servos keep coming off during flight.I tried putting a little loctite on but no good.Anyone have any Idea besides changing all the guts and putting real servos in.
can you take a picture of the problem area and post it here. search "posting pictures" if you need help.
also is there a place for a small screw in the gear? happydad.
happydad- Rest In Peace
- Posts : 1592
Join date : 2012-05-28
Age : 78
Location : Escondido, CA
Re: Sky Cruiser
I will try and take some pics.As far as a place to put a set screw.There is no room at all to put a screw in there.Tower Hobbies is sending a new board.Im going to try that one and see what happens.My friend and I already have some ideas of putting in all new electronics.I think it can be a real nice plane once the bugs are worked out.
coupes4ever- Beginner Poster
- Posts : 5
Join date : 2013-06-21
Re: Sky Cruiser
I have a Spektrum micro linear servo with a loose gear - the motor spins but doesn't move the slider.
There's not much you can do other than getting a replacement.
There's not much you can do other than getting a replacement.
Re: Sky Cruiser
Thanks for the info.My new board should be in tomorrow.Im going to put a spot of CA on the shaft and maybe that will help keep the gears on.
coupes4ever- Beginner Poster
- Posts : 5
Join date : 2013-06-21
Similar topics
» Sky Cruiser Question
» Old Cox Star Cruiser
» Cox sky cruiser:nutshell review
» Cox Sky Cruisers Viper RC conversion build
» O.S. FS 40 Marine
» Old Cox Star Cruiser
» Cox sky cruiser:nutshell review
» Cox Sky Cruisers Viper RC conversion build
» O.S. FS 40 Marine
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum