Log in
Search
Latest topics
» Nostalgia alert, my 1959 Corvette revisitedby rsv1cox Today at 12:18 pm
» audio-tach anyone?
by roddie Today at 11:14 am
» Jim Walkers FireBee - This is going to be fun
by rdw777 Today at 10:22 am
» Prayers for my Wife Please
by fit90 Today at 7:34 am
» Prop Rod - resto to a runner
by getback Today at 6:19 am
» WenMac 049 - Glow Plug & Head Gasket replacements?
by Ken Cook Yesterday at 7:50 pm
» 12 string guitar suggestions
by akjgardner Yesterday at 7:08 pm
» A choke-tube with velocity-stack configured Bee
by roddie Yesterday at 2:54 pm
» Hawk had breakfast and then took a bath
by rsv1cox Yesterday at 10:26 am
» Jim Walker Firebaby
by rdw777 Sat May 18, 2024 4:58 pm
» Cox prop rod
by Wiggy Fri May 17, 2024 4:30 pm
» "Red Neck" .049 elec. starter
by getback Fri May 17, 2024 7:19 am
The Darkside Keeps Calling
Page 1 of 1
The Darkside Keeps Calling
Well, The Darkside has gotten hold of me again. As I said in an earlier thread, I’m going to step up to some minor competition, hopefully Beginner pattern and then on to Nostalgia 30. So I’m building these Skyrays to crash while getting there. I had planned on being at this point two months ago, but life has made me check out of modelling for the past two or three months. I finally have my kits cut out for the three Skyrays.
I have the plans. I have the engines ready to go. I have the covering. I have the glue. Now I just need more time. I had planned on getting these ready so I could get practiced up for competing in Beginners Pattern at the Walker Spring Tune-Up at the end of April, but I don’t see as that I’ll get them done. So I’ll crash some 1/2A planes getting ready for the Tune-Up and take my time with these. I won’t do a build thread, as this’ll be close to a standard build of a Skyray. Rusty had a great thread on building his, so see that thread if you’re interested in a great Skyray build. I’ll just post pictures of things I do differently from a standard build.
For some strange reason, I decided to cut all the ribs out the old fashioned way by tracing the pattern out on balsa and cutting each rib by hand. Silly, as I have two scroll saws. But I was just taken by the whim of doing it old school. Or maybe, with everything going on, I just needed some mindless activity to keep me occupied. But, looking back, I just wish I had seen a thread on these low powered lasers before I started with the X-Acto knife:
http://www.banggood.com/2500mW-A3-30x40cm-Desktop-DIY-Violet-Laser-Engraver-Picture-CNC-Printer-Assembling-Kits-p-1003863.html?rmmds=search
I think I’m going to get one and learn to cut balsa and thin ply parts. There are a few posts by guys using these to cut balsa for plane projects and they get good reviews. Just think of how fast I could pump out my silly ideas with Laser Power!
The Sith Mark
I have the plans. I have the engines ready to go. I have the covering. I have the glue. Now I just need more time. I had planned on getting these ready so I could get practiced up for competing in Beginners Pattern at the Walker Spring Tune-Up at the end of April, but I don’t see as that I’ll get them done. So I’ll crash some 1/2A planes getting ready for the Tune-Up and take my time with these. I won’t do a build thread, as this’ll be close to a standard build of a Skyray. Rusty had a great thread on building his, so see that thread if you’re interested in a great Skyray build. I’ll just post pictures of things I do differently from a standard build.
For some strange reason, I decided to cut all the ribs out the old fashioned way by tracing the pattern out on balsa and cutting each rib by hand. Silly, as I have two scroll saws. But I was just taken by the whim of doing it old school. Or maybe, with everything going on, I just needed some mindless activity to keep me occupied. But, looking back, I just wish I had seen a thread on these low powered lasers before I started with the X-Acto knife:
http://www.banggood.com/2500mW-A3-30x40cm-Desktop-DIY-Violet-Laser-Engraver-Picture-CNC-Printer-Assembling-Kits-p-1003863.html?rmmds=search
I think I’m going to get one and learn to cut balsa and thin ply parts. There are a few posts by guys using these to cut balsa for plane projects and they get good reviews. Just think of how fast I could pump out my silly ideas with Laser Power!
The Sith Mark
batjac- Diamond Member
-
Posts : 2341
Join date : 2013-05-22
Age : 61
Location : Broken Arrow, OK, USA
Re: The Darkside Keeps Calling
Mark, I'm glad that you found some time to cut the Skyray parts out. I hope that there was nothing too serious going on with your or your family's health. Old-school model-building is good for the soul. I look very much forward to seeing the progress.. and wish you all the best.
Re: The Darkside Keeps Calling
Lol, I thought stackin' balsa and cuttin' with a power jig saw....was old school?
Anyway, it's great to see you going again.
Anyway, it's great to see you going again.
Re: The Darkside Keeps Calling
Very nice. Even if you don't do a full build thread, I hope you'll post progress reports with pictures. I'm sure you will do some things differently than I did with mine, and that's worth seeing for other builders looking for ideas.
Rusty
Rusty
_________________
Don't Panic!
...and never Ever think about how good you are at something...
while you're doing it!
My Hot Rock & Blues Playlist
...and never Ever think about how good you are at something...
while you're doing it!
My Hot Rock & Blues Playlist
RknRusty- Rest In Peace
- Posts : 10869
Join date : 2011-08-10
Age : 68
Location : South Carolina, USA
Re: The Darkside Keeps Calling
Good to hear you back and making some dust !! Parts are looking good
getback- Top Poster
-
Posts : 10170
Join date : 2013-01-18
Age : 66
Location : julian , NC
Re: The Darkside Keeps Calling
Mark
How much if any research have you done for the low end laser engraver
I just joined a forum and trying to figure if this thing is worth the trouble to cut simple light balsa ribs
http://benboxlaser.us/index.php
To join you need to send e-mail asking for a access key to register
How much if any research have you done for the low end laser engraver
I just joined a forum and trying to figure if this thing is worth the trouble to cut simple light balsa ribs
http://benboxlaser.us/index.php
To join you need to send e-mail asking for a access key to register
fredvon4- Top Poster
-
Posts : 4002
Join date : 2011-08-26
Age : 68
Location : Lampasas Texas
Re: The Darkside Keeps Calling
I really like the way you have cut yourself 3 complete kits before beginning construction. Some of us, ahem, get a little too excited at the start of a project and only cut parts as needed which can really make a project drag on and eventual confinement to the back of the cupboard is the frequent result.
halfpilot- Formerly known as:
ThermalSniffer - Posts : 96
Join date : 2011-09-06
Location : England
Re: The Darkside Keeps Calling
Well, I guess I’ll take more pics than I planned. Maybe Y’all will find this interesting. I did the stabs and elevators last night. The planes should be colorful when I get them done. The lights in the room wash out the colors. The blue and yellow are much richer, and the pink really is neon pink. Hopefully later photos taken in the day will look more accurate.
Fred, from what I’ve read, these are great for cutting thinner balsa and ply. The admin of the Benbox Laser forum says he’s cut up to 1/8” ply with his. That’s the max thickness of ply I’d do. And I read someone else had no problem cutting 3/32” balsa which is the max thickness I’d use for ribs. If it’ll do 1/8” ply with a couple of passes, it should be able to do ¼” balsa with two or three passes. So I should be able to cut myself complete 1/2A kits. I already have a few designs in my head to try out. I’ve also read the Benbox software that comes with the machine isn’t great. I was planning on buying the software put out by the guy running the Benbox forum. The guys on his forum say it’s pretty good software, and for $40 it’s reasonable for an easy to use CAM package. I’ve been doing a lot of reading on the Benbox forum, and I think I should be able to do this with not too much of a learning curve.
The Spaceman Mark
Fred, from what I’ve read, these are great for cutting thinner balsa and ply. The admin of the Benbox Laser forum says he’s cut up to 1/8” ply with his. That’s the max thickness of ply I’d do. And I read someone else had no problem cutting 3/32” balsa which is the max thickness I’d use for ribs. If it’ll do 1/8” ply with a couple of passes, it should be able to do ¼” balsa with two or three passes. So I should be able to cut myself complete 1/2A kits. I already have a few designs in my head to try out. I’ve also read the Benbox software that comes with the machine isn’t great. I was planning on buying the software put out by the guy running the Benbox forum. The guys on his forum say it’s pretty good software, and for $40 it’s reasonable for an easy to use CAM package. I’ve been doing a lot of reading on the Benbox forum, and I think I should be able to do this with not too much of a learning curve.
The Spaceman Mark
batjac- Diamond Member
-
Posts : 2341
Join date : 2013-05-22
Age : 61
Location : Broken Arrow, OK, USA
Re: The Darkside Keeps Calling
Great share on your builds. What covering are you using. Looks like the tailfeathers came out really nice.
Also, you brought me into the world of Benbox. Looks like good potential. I am a little skittish on running lasers with wood as another fire hazard of this hobby/passion/obsession we play in - LiPo batteries, dope, alcohol, other chemicals for cleaning/thinning. I bought a StepCraft 840 used and haven't had the time to get it hooked up. It can take an after-market laser but I was concerned about fire hazard in my shop, especially having to be present 100% of the time while it is cutting. I will be watching the Benbox forum you gents pointed out, with interest.
Keep the pics and updates coming!
Also, you brought me into the world of Benbox. Looks like good potential. I am a little skittish on running lasers with wood as another fire hazard of this hobby/passion/obsession we play in - LiPo batteries, dope, alcohol, other chemicals for cleaning/thinning. I bought a StepCraft 840 used and haven't had the time to get it hooked up. It can take an after-market laser but I was concerned about fire hazard in my shop, especially having to be present 100% of the time while it is cutting. I will be watching the Benbox forum you gents pointed out, with interest.
Keep the pics and updates coming!
PeterJGregory- Gold Member
- Posts : 144
Join date : 2014-07-28
Age : 61
Location : Hudson Valley, New York
Similar topics
» Back to the Darkside….. Where’re the cookies?!?
» Dabbling in the Darkside (other nitro engines)
» Roddie! I am calling you out!
» Calling all Fox fans
» I used to cross train my armament crews Army, to work on the A-10
» Dabbling in the Darkside (other nitro engines)
» Roddie! I am calling you out!
» Calling all Fox fans
» I used to cross train my armament crews Army, to work on the A-10
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum