Log in
Search
Latest topics
» WenMac 049 - Glow Plug & Head Gasket replacements?by mike in SC Today at 20:31
» 12 string guitar suggestions
by akjgardner Today at 20:08
» audio-tach anyone?
by roddie Today at 15:58
» A choke-tube with velocity-stack configured Bee
by roddie Today at 15:54
» Jim Walkers FireBee - This is going to be fun
by rsv1cox Today at 15:43
» Nostalgia alert, my 1959 Corvette revisited
by Admin Today at 14:11
» Hawk had breakfast and then took a bath
by rsv1cox Today at 11:26
» Prop Rod - resto to a runner
by rsv1cox Today at 8:32
» Jim Walker Firebaby
by rdw777 Yesterday at 17:58
» Prayers for my Wife Please
by akjgardner Yesterday at 11:28
» Cox prop rod
by Wiggy Fri 17 May 2024 - 17:30
» "Red Neck" .049 elec. starter
by getback Fri 17 May 2024 - 8:19
Suggesting basswood stringers for Guillow's RC conversions
Page 1 of 1
Suggesting basswood stringers for Guillow's RC conversions
The 1/16" square balsa stringers may be OK for the little Guillow's airplanes but on the larger ones they break quite easily.
On my 400 seris Guillow's Spit' I've ordered 1/16" (PN# LXA595) square basswood stringers from Tower. 60 24" stringers for $16.79. Basswood is a lot stronger than balsa with only a very slight amount of weight added to the airplane. With basswood stringers it won't be neccessary to "plug" the fuse.
On my 400 seris Guillow's Spit' I've ordered 1/16" (PN# LXA595) square basswood stringers from Tower. 60 24" stringers for $16.79. Basswood is a lot stronger than balsa with only a very slight amount of weight added to the airplane. With basswood stringers it won't be neccessary to "plug" the fuse.
Last edited by SuperDave on Tue 10 Jan 2012 - 20:05; edited 1 time in total
SuperDave- Rest In Peace
- Posts : 3552
Join date : 2011-08-13
Location : Washington (state)
Re: Suggesting basswood stringers for Guillow's RC conversions
Very good al though I find the bulkheads to be by far the weakest parts.
Re: Suggesting basswood stringers for Guillow's RC conversions
I plan to stregthen the bulkheads by adding basswood reinforcement strips on the top and bottom of each where needed. The smaller aft bulkheads don't need reinforcement.
SuperDave- Rest In Peace
- Posts : 3552
Join date : 2011-08-13
Location : Washington (state)
Similar topics
» Guillow's kits: substitution of basswood for balsa stringers
» 2.4 conversions
» Diesel Conversions
» Diesel Conversions
» Pee Wee Backplate Conversions - Anyone Experimenting Yet?
» 2.4 conversions
» Diesel Conversions
» Diesel Conversions
» Pee Wee Backplate Conversions - Anyone Experimenting Yet?
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum