Log in
Search
Latest topics
» Project Cox .049 r/c & Citabrian Championby F4D Phantom II Today at 11:06 pm
» My Cox .049 Marine inboard engine
by 1/2A Nut Today at 10:55 pm
» music vids.. some of your favorites
by HalfaDave Today at 10:50 pm
» Jim Walker Firebaby
by rsv1cox Today at 9:59 pm
» Speed plane - Crispy but not too crispy
by rsv1cox Today at 9:19 pm
» need info on this
by lla Today at 7:19 pm
» Post your Older books
by GallopingGhostler Today at 4:49 pm
» Roddie-Rigger.. a 2005 original design
by rsv1cox Today at 2:17 pm
» O&R 23 & Brown Jr
by lla Today at 1:15 pm
» Fox .35 Modifications
by rdw777 Today at 10:51 am
» Jim Walkers FireBee - This is going to be fun
by rdw777 Today at 10:30 am
» "SOLD OUT" Cox .020 silencers -- currently
by GallopingGhostler Today at 7:12 am
Cox Engine of The Month
"Kap-Pak" glow-plug clip from Ken
Page 1 of 1
"Kap-Pak" glow-plug clip from Ken
Ken Cook graciously mailed me a fuel-bulb and glow-clip recently.. and tonight I decided to wire-up the clip as a spare. The clip is a NIP oldie that was offered by "Kap-Pak"; a distributor of various model supplies back in the day.
I had some good 4C 18ga. high-flex wire that I'd scrounged from a previous job.. so I stripped-off its insulating jacket and got out my soldering equipment, terminals and banana-plugs.
My Cox glow-clips have been giving me fits lately... so I figured that this clip might be a good back-up. I also wanted a clip that would work with my "Testors" 1/2A engines' glow-heads. This clip will give me some options. Thanks Ken!
I had some good 4C 18ga. high-flex wire that I'd scrounged from a previous job.. so I stripped-off its insulating jacket and got out my soldering equipment, terminals and banana-plugs.
My Cox glow-clips have been giving me fits lately... so I figured that this clip might be a good back-up. I also wanted a clip that would work with my "Testors" 1/2A engines' glow-heads. This clip will give me some options. Thanks Ken!
Re: "Kap-Pak" glow-plug clip from Ken
Looks good another top tip:
Heat Shrink over the insulation and connectors to eliminate fractured copper strand loss over time.
1/2A Nut- Top Poster
- Posts : 3433
Join date : 2013-10-20
Age : 60
Location : Brad in Texas
Re: "Kap-Pak" glow-plug clip from Ken
Roddie, just be careful when using it on conventional side exhaust engines. You can accidentally insert the bottom of the clip into the exhaust port. Not a problem until one flips the prop.
Ken Cook- Top Poster
- Posts : 5463
Join date : 2012-03-27
Location : pennsylvania
Similar topics
» Half A, Glow Clip
» Cox Glow Plug Clip Question
» Another Glow Plug CLip Question
» Tee Dee 010 plug clip.
» Glow clip battery
» Cox Glow Plug Clip Question
» Another Glow Plug CLip Question
» Tee Dee 010 plug clip.
» Glow clip battery
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum