Finally, a Cox three piece piston...........

Hi Bob, I have one of those pistons.. (at least one that I know of..) but can't remember running it in an engine. I'm not sure where it came from. It's currently in a small zip-seal bag with some other early Babe Bee parts.. in an effort to assemble a correct early example of the engine.



Note the "W-filament" glowhead. I included it because it's a unique design; not necessarily early.. but kinda' cool. I have five of those heads.

The "larger-knob" needle however is the 1st generation type. I'm not quite sure if all the other parts are 1st generation Babe Bee-correct.. but they're the earliest examples that I have. The main engine-parts pictured may have been an original assembly.. but I'll never know.

Thanks roddie, looks just like mine except mine has a black fuel pickup tube and doesn't have the "Thimble Drome" imprint on the tank.



I have had a couple of the "W" element glow plugs pass through my hands but I don't know where they are now.  I marked the display stand on this one so I know there's a 3 piece piston in there.  



I'm not sure if this is an early glow head or not.





Bob

BTW - If you want to improve the appearance of the cylinder, lightly buff on a wire wheel to remove the old finish (works great to really clean inside the fins) and reblue (blacken) with some gun blue.  Brownell's Oxypho is the best.  The one on mine was particularly bad.