Log in
Search
Latest topics
» M1Fan...who are you?by 944_Jim Yesterday at 10:07 pm
» My Cox .049 Marine inboard engine
by 1/2A Nut Yesterday at 9:52 pm
» Roddie's water-cooled bench-run vid
by roddie Yesterday at 8:55 pm
» Fox .35 Modifications
by Ken Cook Yesterday at 7:19 pm
» Artwork for Otto Kuhni
by Ken Cook Yesterday at 6:42 pm
» Cox AT-6 Texan repaint.....Pretty nice
by rsv1cox Yesterday at 6:25 pm
» Jim Walker Firebaby
by rsv1cox Yesterday at 6:14 pm
» B-25 Mitchell
by roddie Yesterday at 3:09 pm
» Roddie's water-cooling bottle for bench-running
by roddie Yesterday at 2:24 pm
» Cox water wizard
by Wiggy Yesterday at 2:23 pm
» Jim Walkers FireBee - This is going to be fun
by rsv1cox Yesterday at 10:54 am
» Norvel Needle Needed
by Ken Cook Yesterday at 6:52 am
Run Times on Tank/Mounts for Tee Dee .020 and .010
Page 1 of 1
Run Times on Tank/Mounts for Tee Dee .020 and .010
From my Facebook Page:
---------------------------------------------------------------------------------------
Flying bud, Tony, had asked about the run times with the Skylark's future .020 powerplants with them using the new metal combination fuel tank / engine mounts.
After running the Tee Dee .020, I decided to also run an .010 that was handy, and these are the times I got. Both engines had to do some "cobweb flushing", and as expected, they ran longer with each attempt.
I think the .010 ought to get 3 minutes if mounted on an airframe.
The tank / mounts are beautiful little works of art, available from:
https://coxengines.ca/ and
http://www.exmodelengines.com/home.php?cat=264
---------------------------------------------------------------------------------------
Flying bud, Tony, had asked about the run times with the Skylark's future .020 powerplants with them using the new metal combination fuel tank / engine mounts.
After running the Tee Dee .020, I decided to also run an .010 that was handy, and these are the times I got. Both engines had to do some "cobweb flushing", and as expected, they ran longer with each attempt.
I think the .010 ought to get 3 minutes if mounted on an airframe.
The tank / mounts are beautiful little works of art, available from:
https://coxengines.ca/ and
http://www.exmodelengines.com/home.php?cat=264
Kim- Top Poster
-
Posts : 8535
Join date : 2011-09-06
Location : South East Missouri
getback- Top Poster
-
Posts : 10151
Join date : 2013-01-18
Age : 66
Location : julian , NC
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum