Roy Cox Thimble Drome Champion/Cameron tether car. Happy with this one X2

Marleysky wrote:Very nice pair! Your gonna need a bigger shelf!

Yeah, thought of that.  I'm running out of places to stuff stuff.  



But, your's/ours tri-motors are not going anyplace.  I'm blown away by these things always updating them.  Can't have mis-matched spinners.  




I would need two more Texaco engines to really match them up. Edit add: ebay magic. Make that none, found two one from Julian NC.........hmm




Got the SIG balsa to make a flyable version, but have the new P-38 and the Brodak Wildcat ahead of them.

How cool its a very Good price just for one without a engine u have two and one engine Superb find you are lucky

I like odd hour ending, less snipers. The .09 was a lapped piston, no cylinder liner. The .15 had a cylinder liner and smaller head. The .19 has cylinder liner and larger head.
I think this is the needle from Mecoa on eBay but don't have one to be sure.

https://www.ebay.com/itm/283653701065?hash=item420b13fdc9:g:VbMAAOSwaENdsoH1


This is needle a bar at Mecoa

https://www.mecoa.biz/shopexd.asp?id=5496

Thanks David.

And CB I bought one referanced from a prior thread of your's.  

I know nothing about these, but I think this one is an .09?  I have heard about a .19 (.119?).  Hadn't heard about the .15.  Not much about these on the internet.  Oval piston?  Ringed piston?  I looked here under "instructions" but found nothing about the Cameron, just the .045 which has been delayed until tomorrow.  

This one I can see has slotted head bolts, restored one I have has phillips.  

Yellow CB, I'm just trying to keep up with you.    Seller says it's a .19, wondering how he would know.

Seller of the blue restored one says it's a .119. Curious.

Your blue #5 has a .19 head, the yellow has a different head. On .15 and .19 you can look in exhaust port and see the slotted liner.
The .09 you can see no slotted liner.

crankbndr wrote:Your blue #5 has a .19 head, the yellow has a different head. On .15 and .19 you can look in exhaust port and see the slotted liner.
The .09 you can see no slotted liner.

Thanks CB.

That Cameron engine must have a long stroke.  That's the smallest .19 head that I have seen.

Pictured next to an Enya .15.

Here are the spec for .19. .635 bore and .625 stroke so almost square

Interesting and looks like the yellow one has the original/correct plug