Log in
Search
Latest topics
» audio-tach anyone?by balogh Today at 7:04 am
» Prop Rod - resto to a runner
by getback Today at 6:19 am
» WenMac 049 - Glow Plug & Head Gasket replacements?
by Ken Cook Yesterday at 7:50 pm
» 12 string guitar suggestions
by akjgardner Yesterday at 7:08 pm
» A choke-tube with velocity-stack configured Bee
by roddie Yesterday at 2:54 pm
» Jim Walkers FireBee - This is going to be fun
by rsv1cox Yesterday at 2:43 pm
» Nostalgia alert, my 1959 Corvette revisited
by Admin Yesterday at 1:11 pm
» Hawk had breakfast and then took a bath
by rsv1cox Yesterday at 10:26 am
» Jim Walker Firebaby
by rdw777 Sat May 18, 2024 4:58 pm
» Prayers for my Wife Please
by akjgardner Sat May 18, 2024 10:28 am
» Cox prop rod
by Wiggy Fri May 17, 2024 4:30 pm
» "Red Neck" .049 elec. starter
by getback Fri May 17, 2024 7:19 am
COX PT-19 - Super Stunters WHEELS dia???
Page 1 of 1
COX PT-19 - Super Stunters WHEELS dia???
Hi,
Need info about COX PT-19 vs Super Stunters plastic WHEELS diameter, are they same type and dia ???
Intend to draw exact size/shape/profile wheel and print it on 3d printer in black plastic .
Have no any on hand and measuring from the photos, looks 25-32mm dia , but exact , measure size (dia/width) will be of great help.
Thanx
Nenad/Pegin
Need info about COX PT-19 vs Super Stunters plastic WHEELS diameter, are they same type and dia ???
Intend to draw exact size/shape/profile wheel and print it on 3d printer in black plastic .
Have no any on hand and measuring from the photos, looks 25-32mm dia , but exact , measure size (dia/width) will be of great help.
Thanx
Nenad/Pegin
Re: COX PT-19 - Super Stunters WHEELS dia???
pegin964 wrote:Hi,
Need info about COX PT-19 vs Super Stunters plastic WHEELS diameter, are they same type and dia ???
Intend to draw exact size/shape/profile wheel and print it on 3d printer in black plastic .
Have no any on hand and measuring from the photos, looks 25-32mm dia , but exact , measure size (dia/width) will be of great help.
Thanx
Nenad/Pegin
I rebuilt the gear on my PT-19... using a pair of "Sig Manufacturing" wheels which are slightly larger @ 1.375" X .375" or 35mm X 9.5mm. The Cox OEM wheels "might be" 1.25" (dia.) or 31.75mm. which .125" (3.18mm) smaller diameter than the Sig wheels. My OEM gear is buried in a box somewhere.. or else I would measure the wheel diameter for you. You're "in the ballpark".. but I'd lean toward the 32mm.
My Cox PT-19 OEM wheels have an open face on the back-side.. with an integral "hub" for the axle, molded into the front-side/face of the wheel.
The photo below shows the PT-19 OEM gear/wheels with the larger diameter "Sig" wheels for comparison.
Re: COX PT-19 - Super Stunters WHEELS dia???
roddie wrote:
I rebuilt the gear on my PT-19... using a pair of "Sig Manufacturing" wheels which are slightly larger @ 1.375" X .375" or 35mm X 9.5mm. The Cox OEM wheels "might be" 1.25" (dia.) or 31.75mm. which .125" (3.18mm) smaller diameter than the Sig wheels. My OEM gear is buried in a box somewhere.. or else I would measure the wheel diameter for you. You're "in the ballpark".. but I'd lean toward the 32mm.
My Cox PT-19 OEM wheels have an open face on the back-side.. with an integral "hub" for the axle, molded into the front-side/face of the wheel.
The photo below shows the PT-19 OEM gear/wheels with the larger diameter "Sig" wheels for comparison.
Thanx Roddie,
Its open back side wheel i wish to re-create, so, arround 32mm dia is OK.
Will post pics once i complete 3d drawings and print forst wheel-
RGDS
Nenad/Pegin
Re: COX PT-19 - Super Stunters WHEELS dia???
Having exact dimension given by Roddie (THX), this morning i create 32mm dia COX style plastic wheel used on PT-19, Super Stunter, Chipmunk, Skyraider,and probably some other COX models.
And after few try and fail prints, (three , top left on photo) i leave idea of open face wheel and simply print half of the wheels, and later superglue both halves together.
Strong , light , 6 grams each and looks like COX plastic wheel.
Now I just need to build a model for them.
And after few try and fail prints, (three , top left on photo) i leave idea of open face wheel and simply print half of the wheels, and later superglue both halves together.
Strong , light , 6 grams each and looks like COX plastic wheel.
Now I just need to build a model for them.
Re: COX PT-19 - Super Stunters WHEELS dia???
Very nice job , congrat.
latole- Gold Member
- Posts : 368
Join date : 2021-03-28
Location : Quebec province
Re: COX PT-19 - Super Stunters WHEELS dia???
You have the printer working for you now , good job on the repel. wheels So you going to print the CL plane to go with the wheels ?
getback- Top Poster
-
Posts : 10169
Join date : 2013-01-18
Age : 66
Location : julian , NC
Similar topics
» Warrior "flapped" stunter
» Cox RTF Wheels
» Wheel replacements for T-28 Trojan
» big kid big wheels
» Unknown wheels
» Cox RTF Wheels
» Wheel replacements for T-28 Trojan
» big kid big wheels
» Unknown wheels
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum