Cya vs monokote

Nothing!! New Monokote..CA is brutal stuff...it will come off with acetone...you can purchase acetone based nail poloish remover but I found this works not that good. If I deal with finished Monokote surfaces and construction stay with epoxy products..alcohol takes it rite off..stay away from CA & Monokote combinations when building...lesson learned the hard way with me...building with CA once, then the nice FBI fingerprint job appeared all over my monokote wing...really mad!! Now I use gloves when using CA and never around Monokote!! That's me though!!

I use pure acetone, but be careful around seams since it will lift edges.

Fingernail polish remover and CA debonder have other additives that make them less preferable for cleaning up monokote.

I like acetone too, but be careful because it will lift edges and clean the adhesive off the Monokote.

Acetone worked like a charm. Thanks.

Try the acetone on piece of Monokote before trying this..it just might effect the finish on the Monokote!