gear sizing for cox powered cars

hey happy dad they don't have to metric just give me links to the parts i need to buy etc etc so i can just slot it together

cox24711 wrote:hey happy dad they don't have to metric just give me links to the parts i need to buy etc etc so i can just slot it together

i can only point you in the parts direction, i can't find everything for you. Other car parts that would work with Cox are Kyosho. They make the Nissan I think in the other link about Cox cars.

https://www.coxengineforum.com/t5502-cox-stocker-0-49-indy-car-nissan-gtp#112020

happydad

in your language the car is 10 1/2 inches long and 4inches wide and 2 1/4 inches tall

and the wheel width is 1.7716535 in your language

cox24711 wrote:and the wheel width is 1.7716535 in your language

the wheel itself? it must be a wide slick tire or very large in diameter. what is the diameter? what is the width of the wheels outside of wheel to outside of wheel? You really need to look at the Cox Nissan GTP. I found a second one.  Link:

http://www.ebay.com/itm/252105920120?_trksid=p2055359.m1431.l2649&ssPageName=STRK%3AMEBIDX%3AIT


Cox Nissan GTP

steering servo missing.

happydad            

happydad wrote:

cox24711 wrote:and the wheel width is 1.7716535 in your language

the wheel itself? it must be a wide slick tire or very large in diameter. what is the diameter? what is the width of the wheels outside of wheel to outside of wheel? You really need to look at the Cox Nissan GTP. I found a second one.  Link:

http://www.ebay.com/itm/252105920120?_trksid=p2055359.m1431.l2649&ssPageName=STRK%3AMEBIDX%3AIT


Cox Nissan GTP

steering servo missing.

happydad            

oh i'm stupid the wheel diameter and thw width of the wheel 1 /8 of an inch

20 bux deal!!!!!!

cox24711 wrote:in your language the car is 10 1/2 inches long and 4inches wide and 2 1/4 inches tall

it sounds like the car is 1/8 to 1/10 scale. I have a 1/8 scale gas car in the garage, but the engine was a .25cu.in. and it is about 17inches long, so I would lean to 1/10 scale. My old RC10 electric offroad car is 1/10 scale and is about 14inches long so maybe 1/12th scale, but that isn't common here. 1/10th, 1/16th, 1/18th are common. Don't ask me who makes the scales. I also have 1/16 scale electric 4x4 offroad and it is about 10 inches in length. I can give you some car names and the parts are available thru hobbyking. It is based in China, but has a warehouse in Australia. Not all parts are available in all warehouses.
One of my cars is the Turnigy 1/16 4x4 Mini Trooper SCT (ARR), and the other 1/16 Brushless 4WD Short Course Truck w/ 25Amp System.  When you get to hobbyking, if you choose to, search cars and parts, almost ready to run, offroad, electric, then scroll down to the Turnigy 1/16 4x4 Mini Trooper SCT (ARR), or the 1/16 Brushless 4WD Short Course Truck w/ 25Amp System. Make sure you choose the International warehouse because that is the only place that you will find "spare parts" right below the price. there you will find things like gears, etc. Also you should see below the reviews, tabs and one of them is: files. In the files will be you should see a files called Manual. This is the Manual for that car or truck. In the manual are ALL the parts, gears, motor, battery, etc.

here is a sample of the manual Page 5.

Page 5 for Turnigy 1/16 4x4 minitrooper


Turnigy 1/16 4x4 minitrooper gear train

I have 1 of the above and I got one for my grandson. The other grandson will get the 1/16 turnigy 4WD SCT next month.


Turnigy 1/16 4WD SCT

the SCT 4WD path is similar. If you want to buy stuff see if it is available in the Australian warehouse first. If you are looking for part numbers or manuals go to the International warehouse first.
you are welcome.

happydad

cox24711 wrote:20 bux deal!!!!!!

slow down. this is an auction. high bidder wins. It should sell for around $100.00 is my guess. I wont bid again. my bid was $22.00.

happydad

thanks alot

cox24711 wrote:thanks alot

this pic might get you thinking. Most of these parts should be available thru Cox or Kyosho or ask on CEF for help for rear wheel gear for a certain car. (Vega in this case).

link:
http://www.ebay.com/itm/VINTAGE-COX-THIMBLE-DROME-VEGA-FUNNY-CAR-ROLLING-CHASSIS-ENGINE-REAR-AXLE-ASSE-/221897353119?hash=item33aa1ce79f


Rear wheel gears of Vega Funny Car

happydad  

Greg, my Jerobee has a ratio of 1 : 5,6. The gear on the engine has 10 teeth and the gear on the axle has 56 teeth. Earlier cars had a 1/7 ratio. The rear wheels are 56mm diameter and are 39mm wide. Typre JEROBEE or JOMAC on EBay and you'll find gears and tyres. However, the gear on the engine is a Cox part.

Lieven

OVERLORD wrote:Greg, my Jerobee has a ratio of 1 : 5,6. The gear on the engine has 10 teeth and the gear on the axle has 56 teeth. Earlier cars had a 1/7 ratio. The rear wheels are 56mm diameter and are 39mm wide. Typre JEROBEE or JOMAC on EBay and you'll find gears and tyres. However, the gear on the engine is a Cox part.

Lieven

Thanks Lieven. I was about to run out of things to say. +1 to you for your help.

happydad

thank you soo much guys i think im heading the right way and good night well for me dad is going to what the rugby and have a couple of s im too tired ive been learning a new acdc song on my guitar Its called hells bells also we had a loverly roast that mum has had cooking all day