Sold out Cox .049 silencers for sale

sosam117 Sat 2 Mar 2024 - 16:22

These silencers are similar in design to the Cox .020 mufflers but slightly larger to accommodate the Cox .049 engine

Top of silencer

Sold out Cox .049 silencers for sale 005a_m11

Bottom of silencer

Sold out Cox .049 silencers for sale 006_mu11

Sold out Cox .049 silencers for sale 007_mu11

Sold out Cox .049 silencers for sale 008_mu10

Sold out Cox .049 silencers for sale 04905114

Installation instructions

Please check the cylinder dimensions:

As the cylinder sleeve sizes vary slightly you might have to adjust the fit?
The parts that interfere (i.D.) with the engine cylinder will need to be shaped. (enlarged?)
Using a slightly undersized wooden dowel and some 220-grit sandpaper wrapped around the dowel to carefully enlarger the hole for the cylinder sleeve by twisting the dowel/sandpaper in the hole to enlarge it. Don't overdo it now! you want a snug /slip fit.

Included with the silencer are two different thickness size shims (.008" / .012") (0.2mm/ 0.3mm) to give the silencer a tight enough fit when the cylinder is tightened down and the silencer is snug enough to not move. If it does, you'll need to add one of the shims on the bottom side of the silencer.

One more FYI (if necessary) -- use a small amount of Permatex (non-hardening) gasket sealant on the upper and lower faces of the silencer to get a really good seal.

The exhaust tubing is 5mm I.D. diameter.

Thanks,
sosam117
Mike Mac