Log in
Search
Latest topics
» Revivng Some Childhood Classicsby GTO455 Today at 8:11 am
» My Cox .049 Marine inboard engine
by rsv1cox Today at 7:41 am
» Jim Walkers FireBee - This is going to be fun
by rsv1cox Today at 7:29 am
» **VOTE-ON-THE-NEXT-COX-ENGINE-OF-THE-MONTH** (May 2024)
by akjgardner Today at 6:10 am
» Help Pee Wee tank cap .020
by MauricioB Yesterday at 10:11 pm
» Post your Older books
by rsv1cox Yesterday at 7:51 pm
» EXTREMELY RARE COX THIMBLE DROME PROTOTYPE "BLACK WIDOW" GAS MODEL AIRPLANE
by rsv1cox Yesterday at 6:58 pm
» I brake for Turtles....
by rsv1cox Yesterday at 6:38 pm
» Ball - Socket Joints
by Ken Cook Yesterday at 3:06 pm
» A little nostalgia…
by MauricioB Yesterday at 2:32 pm
» A new useful transport vehicle
by davidll1984 Yesterday at 10:32 am
» TAPLIN TWIN 7ccm
by grant.symes Yesterday at 3:29 am
Cox Engine of The Month
Tee Dee .010 Needle valve setting
Page 1 of 1
Tee Dee .010 Needle valve setting
Greetings- FYI.... my Tee Dee .010 required me to open up the needle valve 6.5 turns to start and run. Kind of unusual, I thought. Anyone else have similar experience?
Bob
Bob
rfara- Moderate Poster
- Posts : 24
Join date : 2022-03-09
Re: Tee Dee .010 Needle valve setting
Hey man sorry no one has replied ! The instruction sheet says 4 turns , I have had to open my a little further before . have you inspected the spray bar hole ? If you can see it open the needle and put the filler on the end nipple and give it a good squirt !! Hold the engine upside down as not to flood it ck. your stream at 4 turns if it dirty this will help clean it also + I have took the needle out and used my finger on the insert and pressure it . >> https://drive.google.com/file/d/1Lsh_5irMK8e6VdAIzW4TSCNQrrUC3Ui1/view
getback- Top Poster
-
Posts : 10138
Join date : 2013-01-18
Age : 66
Location : julian , NC
Similar topics
» .049 Needle Valve Setting Too Touchy
» Re-setting a piston?
» fuel pickup tube spring
» Setting up a poll
» Needle Setting For Cox Engine With Fine Thread Needle
» Re-setting a piston?
» fuel pickup tube spring
» Setting up a poll
» Needle Setting For Cox Engine With Fine Thread Needle
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum