Log in
Search
Latest topics
» A prototype Cox Reed-valve marine engineby F4D Phantom II Today at 7:00 pm
» World's largest weathervane
by Cox International Today at 5:51 pm
» Jim Walkers FireBee - This is going to be fun
by rsv1cox Today at 5:27 pm
» **VOTE-ON-THE-NEXT-COX-ENGINE-OF-THE-MONTH** (May 2024)
by getback Today at 3:25 pm
» Here we go again... another Lawn-Boy
by rsv1cox Today at 6:50 am
» Norvel Needle Needed
by Greenman38633 Today at 4:02 am
» My Cox .049 Marine inboard engine
by 1/2A Nut Yesterday at 11:41 pm
» Jim Walker Firebaby
by rsv1cox Yesterday at 7:26 pm
» Roddie-Rigger.. a 2005 original design
by roddie Yesterday at 7:04 pm
» music vids.. some of your favorites
by HalfaDave Yesterday at 6:55 pm
» Help Pee Wee tank cap .020
by rdw777 Yesterday at 1:30 pm
» Revivng Some Childhood Classics
by getback Yesterday at 8:21 am
Cox Engine of The Month
Mecoa glow plug adapter head for TD09
Page 1 of 1
Mecoa glow plug adapter head for TD09
This topic or a similar may have been posted here before, yet I write about it and ask for advice of anyone having the experience.
The Mecoa trumpet-shaped head with the glow plug (K&B 1L 7311) that Mecoa says performs well with it cannot make my TD09 with muffler spin faster than 15,3k with a 6x4 prop, when fed on 20% nitro. The engine ran hot so I added 1 then 2 more shims under the head with no apparent improvement on the rpm.
The stock COX high compression TD09 head easily revs it up to 19k under the same conditions.
I know the point is the glow plug that may emit more heat than the stock glow head and cause premature ignition thus overheating the engine.
Yet I ask if anyone has managed to approach the same rpm with the glow plug adaptor head as with the stock COX head, with how many shims, and what glow plug, and what was the difference between the two rpm-s?
Thank you.
The Mecoa trumpet-shaped head with the glow plug (K&B 1L 7311) that Mecoa says performs well with it cannot make my TD09 with muffler spin faster than 15,3k with a 6x4 prop, when fed on 20% nitro. The engine ran hot so I added 1 then 2 more shims under the head with no apparent improvement on the rpm.
The stock COX high compression TD09 head easily revs it up to 19k under the same conditions.
I know the point is the glow plug that may emit more heat than the stock glow head and cause premature ignition thus overheating the engine.
Yet I ask if anyone has managed to approach the same rpm with the glow plug adaptor head as with the stock COX head, with how many shims, and what glow plug, and what was the difference between the two rpm-s?
Thank you.
balogh- Top Poster
-
Posts : 4751
Join date : 2011-11-06
Age : 65
Location : Budapest Hungary
Re: Mecoa glow plug adapter head for TD09
This is an inherent problem with regular glow plugs, they simply seal in the wrong place and the threads of the plugs become a part of the combustion chamber. The only way to match the stock heads is to use the Turbo or Nelson style of plugs.
One thing you can try though is to seal the threads with high temp silicon, let it cure over night before running it. This trick has helped on .049 engines.
I cannot believe that anyone ever requested that type of head, when Valentine showed how one should do it....
One thing you can try though is to seal the threads with high temp silicon, let it cure over night before running it. This trick has helped on .049 engines.
I cannot believe that anyone ever requested that type of head, when Valentine showed how one should do it....
Surfer_kris- Diamond Member
- Posts : 1906
Join date : 2010-11-20
Location : Sweden
Re: Mecoa glow plug adapter head for TD09
Thank you I would never have thought if this. Will try.
balogh- Top Poster
-
Posts : 4751
Join date : 2011-11-06
Age : 65
Location : Budapest Hungary
Re: Mecoa glow plug adapter head for TD09
balogh wrote:Thank you I would never have thought if this. Will try.
There is a good read about regular plugs here; http://www.rcuniverse.com/forum/1-2-1-8-airplanes-70/7973256-great-glow-plug-run-off.html
To make a long story short, regular plugs can be made to work if the threads are sealed and if the head has the right compression ratio.
Surfer_kris- Diamond Member
- Posts : 1906
Join date : 2010-11-20
Location : Sweden
Re: Mecoa glow plug adapter head for TD09
Thanks Kris very good reads. I can seal the threads but for me the only way of increasing compression further is removing shims from under the head
balogh- Top Poster
-
Posts : 4751
Join date : 2011-11-06
Age : 65
Location : Budapest Hungary
Similar topics
» Glow Plug Head Adapter
» Cox .15 glow head adapter plug type
» glow plug adapter
» Diesel or Glow Head
» Anodized glow head adapter ring
» Cox .15 glow head adapter plug type
» glow plug adapter
» Diesel or Glow Head
» Anodized glow head adapter ring
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum