Killer bee clone/ hobbyking mini stick

Post a vid on you tube so we can see it jam out!

I will when it warms up for good around here and the wind dies down. It probably flys over 100 mph. I had to add 50% expo and hold on for several minutes!

Dang. I was just going to say that by looking at the engine to plane ratio that it was going to be quick....

It dead sticks very well and it's easy to land but it's pretty sporty in the air.

Kewol beans glad your having fun with them. Here is one of my planes
a bit too small for a 1/2A engine real heart thumper to fly.



D .049 /SPI / Throttle Sleeve Ports Allow SPI function / Prop 4.1 x 4.1N / 30% Nitro
Static 24,790 rpm / 7.4oz thrust / .127hp / 94.74w / 96.2 mph / 6.19oz RTF
Unloaded 30,492 best on Vid 1 / 118.4 mph per prop calc.
Doppler reading has it at 118mph per pass at 1:47mins into the vid.
Hard tank no pressure tap. 3.7g servos. Cox low compression plug
3mins 20sec of run time on 15cc tank. 16.5"x4" span wing 66sq. in.

Lol! That may even be a bit faster than my mini stick! Heart thumping adrenaline filled flights but it's fun after you successfully get them back on the ground! I like the hornet starter you have, a must for all 1/2a flyers. If I had 1 in the 80's and 90's I may not have as many scars on my fingers! Lol

Yes lol, my first 1/2A starter was a 05 can motor and automotive radiator over fill hose.

Innovative! Lol