Log in
Search
Latest topics
» A prototype Cox Reed-valve marine engineby F4D Phantom II Today at 7:00 pm
» World's largest weathervane
by Cox International Today at 5:51 pm
» Jim Walkers FireBee - This is going to be fun
by rsv1cox Today at 5:27 pm
» **VOTE-ON-THE-NEXT-COX-ENGINE-OF-THE-MONTH** (May 2024)
by getback Today at 3:25 pm
» Here we go again... another Lawn-Boy
by rsv1cox Today at 6:50 am
» Norvel Needle Needed
by Greenman38633 Today at 4:02 am
» My Cox .049 Marine inboard engine
by 1/2A Nut Yesterday at 11:41 pm
» Jim Walker Firebaby
by rsv1cox Yesterday at 7:26 pm
» Roddie-Rigger.. a 2005 original design
by roddie Yesterday at 7:04 pm
» music vids.. some of your favorites
by HalfaDave Yesterday at 6:55 pm
» Help Pee Wee tank cap .020
by rdw777 Yesterday at 1:30 pm
» Revivng Some Childhood Classics
by getback Yesterday at 8:21 am
Cox Engine of The Month
The old Jedi Leadout offset trick …
Page 1 of 1
The old Jedi Leadout offset trick …
Guys , here’s just another old trick to keep your lines tight … That with an offset motor , and offset rudder, there’s little chance of your plane chasing you in the circle … The leadouts are slightly further back than the bellcrank . Always worked for me … Hope this helps …
GPW- Silver Member
- Posts : 85
Join date : 2019-02-19
Location : New Orleans
Re: The old Jedi Leadout offset trick …
The leadout position is most important. The bellcrank not so much, until it starts binding.
aspeed- Platinum Member
- Posts : 790
Join date : 2013-01-18
Location : Leamington Ont. Can.
Re: The old Jedi Leadout offset trick …
Thanks for sharing that. With that simple picture and picturing the engine and rudder offset, I can see how it would want to go to the outside of the circle. I had one plane once that I thought was a real 'head-hunter'. It came towards teh center of teh circle more often than not.....
NEW222- Top Poster
- Posts : 3892
Join date : 2011-08-13
Age : 45
Location : oakbank, mb
Re: The old Jedi Leadout offset trick …
Good for the circulation, keeps the adrenaline going. As long as it doesn't hit your head.
aspeed- Platinum Member
- Posts : 790
Join date : 2013-01-18
Location : Leamington Ont. Can.
Re: The old Jedi Leadout offset trick …
Sweeping the leadouts back does indeed increase line tension. It only does this under 45 degrees. As soon as you pull into a wingover, the plane loses line tension up high due to losing speed and being yawed out. Speed is what keeps line tension. You want to sweep your leadouts as far forward as you can to attain line tension in level flight. If your just a roundy round flyer with a occasional loop, this is a non issue. If you want to fly the plane like you stole it, don't keep the leadouts swept back too far. This goes in hand with rudder offset. It's absolutely not necessary. It doesn't allow the plane to fly tangent to the circle to attain the needed speed to maintain proper line tension. Rudder offset isn't going to save a plane that loses line tension. Many add engine offset, rudder offset and sweep the leadouts rearward. You now have a plane that flies like a turd and loses line tension when you try to fly overhead maneuvers.
Ken Cook- Top Poster
- Posts : 5478
Join date : 2012-03-27
Location : pennsylvania
Re: The old Jedi Leadout offset trick …
Yep, there is "too much of a good thing” …and yes I’m "just a roundy round flyer”… My 1/2A planes were never very good at stunting , same as me as a pilot … Just a non competitive Fun Flyer , I’m happy to just go round and round ...
GPW- Silver Member
- Posts : 85
Join date : 2019-02-19
Location : New Orleans
Re: The old Jedi Leadout offset trick …
I'm a roundy-round flier too. Although I have been known to do some pretty good 'Figure 9's'! Also, I have not really designed anything of my own, and I do keep teh lines as per the plans cause I think the ones who designed them know a lot more than lil old me.
NEW222- Top Poster
- Posts : 3892
Join date : 2011-08-13
Age : 45
Location : oakbank, mb
Re: The old Jedi Leadout offset trick …
When I set-up the lead-out guide-position on my own designs, I generally suspend the model by the lead-outs.. and mark the position on the wing-tip where the models' "nose" drops just a few (2-3) degrees. My five latest designs have zero rudder-offset.. and zero thrust-offset.
I'll also be experimenting with L/H propellers on four of those five designs, which are set-up for Cox .049 reed-valve engines for their reverse-rotation capability.
I'll also be experimenting with L/H propellers on four of those five designs, which are set-up for Cox .049 reed-valve engines for their reverse-rotation capability.
Similar topics
» What's your favorite CL leadout wire?
» Comments of this type of leadout arraignment
» So, what's the trick?
» Trick or Treat
» Cox Stocker from the beginning (killer bee engine)
» Comments of this type of leadout arraignment
» So, what's the trick?
» Trick or Treat
» Cox Stocker from the beginning (killer bee engine)
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum