Log in
Search
Latest topics
» WenMac 049 - Glow Plug & Head Gasket replacements?by Ken Cook Today at 3:17 pm
» audio-tach anyone?
by roddie Today at 2:58 pm
» A choke-tube with velocity-stack configured Bee
by roddie Today at 2:54 pm
» Jim Walkers FireBee - This is going to be fun
by rsv1cox Today at 2:43 pm
» 12 string guitar suggestions
by 1/2A Nut Today at 1:58 pm
» Nostalgia alert, my 1959 Corvette revisited
by Admin Today at 1:11 pm
» Hawk had breakfast and then took a bath
by rsv1cox Today at 10:26 am
» Prop Rod - resto to a runner
by rsv1cox Today at 7:32 am
» Jim Walker Firebaby
by rdw777 Yesterday at 4:58 pm
» Prayers for my Wife Please
by akjgardner Yesterday at 10:28 am
» Cox prop rod
by Wiggy Fri May 17, 2024 4:30 pm
» "Red Neck" .049 elec. starter
by getback Fri May 17, 2024 7:19 am
Cox .09 Cylinders
Page 1 of 1
Cox .09 Cylinders
I have a couple of old .09's. One TeeDee 35 years young. The other Medallion is a couple years newer but still not too new. I am wondering where to locate a couple of decent cylinders and possibly pistons. The TeeDee runs good but is definitely past it's prime.
What is a good way to get some decent cylinders that will perform well again.
Thanks
Iceberg
What is a good way to get some decent cylinders that will perform well again.
Thanks
Iceberg
Iceberg- Gold Member
- Posts : 381
Join date : 2018-11-03
Location : Suva Fiji Islands
Re: Cox .09 Cylinders
Have you checked Cox International?
https://coxengines.ca/cox-09/
https://coxengines.ca/cox-09/
dirk gently- Gold Member
- Posts : 429
Join date : 2012-02-03
Age : 41
Location : PoznaĆ
Re: Cox .09 Cylinders
dirk gently wrote:Have you checked Cox International?
https://coxengines.ca/cox-09/
Unfortunately they only have cylinders but no pistons.
EX model engines have pistons, but you need to buy an R/C cylinder (no SPI) to get one.
http://www.exmodelengines.com/product.php?productid=18297&cat=254&page=2
Oldenginerod- Top Poster
- Posts : 3977
Join date : 2012-06-15
Age : 61
Location : Drouin, Victoria
Re: Cox .09 Cylinders
I did so via ebay store but didn't see anything about .09 models. I'll take a look there should be some there.
Thanks
Ice
Thanks
Ice
Iceberg- Gold Member
- Posts : 381
Join date : 2018-11-03
Location : Suva Fiji Islands
Re: Cox .09 Cylinders
Iceberg wrote:I have a couple of old .09's. One TeeDee 35 years young. The other Medallion is a couple years newer but still not too new. I am wondering where to locate a couple of decent cylinders and possibly pistons. The TeeDee runs good but is definitely past it's prime.
What is a good way to get some decent cylinders that will perform well again.
Thanks
Iceberg
You wore out an .09?!? First time I ever heard of anyone doing that...
The Incredulous Mark
batjac- Diamond Member
-
Posts : 2339
Join date : 2013-05-22
Age : 61
Location : Broken Arrow, OK, USA
Re: Cox .09 Cylinders
Well still runs ok. But blow by is a fair bit. Especially on the TD. RPM quite a bit lower than years ago. Needs a better cylinder. Hopefully not piston too.
Thanks
Ice
Thanks
Ice
Iceberg- Gold Member
- Posts : 381
Join date : 2018-11-03
Location : Suva Fiji Islands
Similar topics
» Cylinders .020 Pee Wee
» cox v-12 using .049 cylinders
» FS: .010 Tee Dee Cylinders
» COX engine throttles
» #3 cylinders
» cox v-12 using .049 cylinders
» FS: .010 Tee Dee Cylinders
» COX engine throttles
» #3 cylinders
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum