Log in
Search
Latest topics
» Roddie's water-cooling bottle for bench-runningby getback Today at 12:19 pm
» Jim Walker Firebaby
by rsv1cox Today at 10:29 am
» Joe Wagners Sioux
by rdw777 Today at 9:55 am
» B-25 Mitchell
by rdw777 Today at 9:49 am
» Artwork for Otto Kuhni
by rsv1cox Today at 9:39 am
» Cox water wizard
by Wiggy Today at 6:32 am
» M1Fan...who are you?
by 944_Jim Yesterday at 10:07 pm
» My Cox .049 Marine inboard engine
by 1/2A Nut Yesterday at 9:52 pm
» Roddie's water-cooled bench-run vid
by roddie Yesterday at 8:55 pm
» Fox .35 Modifications
by Ken Cook Yesterday at 7:19 pm
» Cox AT-6 Texan repaint.....Pretty nice
by rsv1cox Yesterday at 6:25 pm
» Jim Walkers FireBee - This is going to be fun
by rsv1cox Yesterday at 10:54 am
cox rc cars gtp 049 mod
Page 3 of 3
Page 3 of 3 • 1, 2, 3
Re: cox rc cars gtp 049 mod
Thanks for the prime trick David , I think i need to do this to my starter strips too . They were made per Jason here on CEF and are beeing tested , But i have already broken one I see you only pull it a short distance to engage , I was pulling it all the way through and was hard to keep engaged with sprocket .davidll1984 wrote:Strap starter how To maque them flexible like new first let the part in hot water Not boling in pot y use long heat résistent conteiner make sure strap Not bent let it sit long as posible.befor water start To cool down too mutch place part dry and aply wd40 lube
on the part let cool down place part in bag let it for night it wil penetrate in plastiques make it flexible like new
getback- Top Poster
-
Posts : 10155
Join date : 2013-01-18
Age : 66
Location : julian , NC
Re: cox rc cars gtp 049 mod
Yes it's true that it's a bit difficult to use but once you have the trick it's easy We must let the strap rub on the Front part of the aluminium motor support and pull towards the rear a little to engage properly Have a smooth surface under the rear of the car so that the strap slides well Prepare the engine well so as not to crank for nothing i dont use the choke Don't really follow the instructions Remove the head to crank at the start the compression is very( large hi) , leave the head loose for the pre-heat it take Not mutch like two second kil the engine wit flywheel than instal heatsink after The tightening of the head Most importantly, the ignition source use a Good glow igniter fuly charge to start them ritch it help and dont pul like crazy just A quick quickie pull A short stroke Be careful not to return it over quickly in case of a second pull
davidll1984- Diamond Member
- Posts : 2293
Join date : 2020-02-12
Age : 39
Location : shawinigan
Page 3 of 3 • 1, 2, 3
Similar topics
» Vintage Rc Cars - Now with Video of the Chevy Stadium Truck :) New Cars!!!
» Auto World Vega funny Car
» RC Cars Cox 0.49 (Cox Stocker Kyosho f1,beetle) Killer Bee Backplate New Video!
» Mattel's Hot Wheels fans, a heads-up
» Cars, cars, and more cars
» Auto World Vega funny Car
» RC Cars Cox 0.49 (Cox Stocker Kyosho f1,beetle) Killer Bee Backplate New Video!
» Mattel's Hot Wheels fans, a heads-up
» Cars, cars, and more cars
Page 3 of 3
Permissions in this forum:
You cannot reply to topics in this forum