Log in
Search
Latest topics
» WenMac 049 - Glow Plug & Head Gasket replacements?by Ken Cook Today at 3:17 pm
» audio-tach anyone?
by roddie Today at 2:58 pm
» A choke-tube with velocity-stack configured Bee
by roddie Today at 2:54 pm
» Jim Walkers FireBee - This is going to be fun
by rsv1cox Today at 2:43 pm
» 12 string guitar suggestions
by 1/2A Nut Today at 1:58 pm
» Nostalgia alert, my 1959 Corvette revisited
by Admin Today at 1:11 pm
» Hawk had breakfast and then took a bath
by rsv1cox Today at 10:26 am
» Prop Rod - resto to a runner
by rsv1cox Today at 7:32 am
» Jim Walker Firebaby
by rdw777 Yesterday at 4:58 pm
» Prayers for my Wife Please
by akjgardner Yesterday at 10:28 am
» Cox prop rod
by Wiggy Fri May 17, 2024 4:30 pm
» "Red Neck" .049 elec. starter
by getback Fri May 17, 2024 7:19 am
COX 049 Product Engine '76 - type confirm .
Page 1 of 1
COX 049 Product Engine '76 - type confirm .
Bought at EBAY UK, this supoposedly COX 049Product Engine '76 , need expert to confirm the type.
Its No2 cylinder, open exhaust ports , single bypass , came with spring starter and red plastic starter cap/plate (not on the photo).
Thanx for any comments,
RGDS
Its No2 cylinder, open exhaust ports , single bypass , came with spring starter and red plastic starter cap/plate (not on the photo).
Thanx for any comments,
RGDS
OVERLORD- Diamond Member
- Posts : 1791
Join date : 2013-03-19
Age : 57
Location : Normandy, France
Re: COX 049 Product Engine '76 - type confirm .
Dale Kirns favorite "290" product engine. EDIT: WRONG the 290 had a small red backplate. my bad.
Marleysky- Top Poster
-
Posts : 3618
Join date : 2014-09-28
Age : 71
Location : Grand Rapids, MI
Re: COX 049 Product Engine '76 - type confirm .
This No.2 cylinder is very good for everyday flying. Unless you want to swap in a No 1., you can slightly ramp up its output with a stock high compression head or, even more so with a turbo head..
balogh- Top Poster
-
Posts : 4755
Join date : 2011-11-06
Age : 65
Location : Budapest Hungary
Re: COX 049 Product Engine '76 - type confirm .
Thanx for the comments, looks its 1973.-76. product engine ECJ #28 a-g , having shorter needle , as listed in C.M.E.H. book at pages 22/23.
Will test it today , on ME-109 Stunter replica.
Initially, brand new Cox .049 Production Engine PT-19 ( from coxengines.ca) was installed , but have problem with glowhead/cilynder thread leaking , changing glowheads and gaskets does not change anything, simply replaced engine with this ECJ # 28, and will solve this leaking later, durring the winter days , trying to catch last sunny and no wind days here.
Thanx
RGDS
Will test it today , on ME-109 Stunter replica.
Initially, brand new Cox .049 Production Engine PT-19 ( from coxengines.ca) was installed , but have problem with glowhead/cilynder thread leaking , changing glowheads and gaskets does not change anything, simply replaced engine with this ECJ # 28, and will solve this leaking later, durring the winter days , trying to catch last sunny and no wind days here.
Thanx
RGDS
Re: COX 049 Product Engine '76 - type confirm .
The test was performed successfully. ECJ # 28 runs well, and more, it pulls great through flight balsa replica Me109 Super Stunter.
More on Super Stunter replica topic.
https://www.coxengineforum.com/t13966-cox-me-109-super-stunter-balsa-replica-build-v2-2020?highlight=109+replica
More on Super Stunter replica topic.
https://www.coxengineforum.com/t13966-cox-me-109-super-stunter-balsa-replica-build-v2-2020?highlight=109+replica
Similar topics
» Product engine .051??
» What Product Engine?
» "Product engine"
» Is this an 020 product engine?
» Need help identifying rear end
» What Product Engine?
» "Product engine"
» Is this an 020 product engine?
» Need help identifying rear end
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum