Log in
Search
Latest topics
» A little nostalgia…by KariFS Today at 2:46 pm
» TAPLIN TWIN 7ccm
by grant.symes Today at 11:29 am
» **VOTE-ON-THE-NEXT-COX-ENGINE-OF-THE-MONTH** (May 2024)
by GallopingGhostler Today at 8:09 am
» Tired of it all…
by roddie Today at 7:09 am
» Roddie-Rigger.. a 2005 original design
by roddie Today at 6:27 am
» Science and Mechanics magazine's "Playboy" 14' plywood runabout plans.. circa 1950's
by roddie Today at 5:30 am
» My Cox .049 Marine inboard engine
by roddie Today at 5:07 am
» Ball - Socket Joints
by roddie Today at 3:55 am
» Post your Older books
by crankbndr Yesterday at 11:08 pm
» Cox wrench
by layback209 Yesterday at 11:03 pm
» Black Widow Run time
by getback Yesterday at 6:04 pm
» How does your Garden Grow
by getback Yesterday at 2:26 pm
Cox Engine of The Month
Just finished rebuilding and restoring Cox 190-8 engine
Page 1 of 1
Dougad50- Bronze Member
- Posts : 37
Join date : 2022-05-21
Location : Indianapolis area
Re: Just finished rebuilding and restoring Cox 190-8 engine
What model is it from? I don't recognize the throttle.
crankbndr- Top Poster
- Posts : 3073
Join date : 2011-12-10
Location : Homestead FL
Re: Just finished rebuilding and restoring Cox 190-8 engine
NICE , this from eBay seems i remember seeing it there ?!
getback- Top Poster
-
Posts : 10135
Join date : 2013-01-18
Age : 66
Location : julian , NC
Re: Just finished rebuilding and restoring Cox 190-8 engine
Very pretty, well placed in this box which highlights it I have a very similar one with the same throttle ring but the back plate was missing. Mine had a red plastic tip on the ring like a litle handle
davidll1984- Diamond Member
- Posts : 2288
Join date : 2020-02-12
Age : 39
Location : shawinigan
Re: Just finished rebuilding and restoring Cox 190-8 engine
no I been restoring the Cox Dragster and Pinto funny cars. Have a few done to pass on to kids later. Had one I use for parts it was in too bad shape to restore so that’s the engine out of itgetback wrote:NICE , this from eBay seems i remember seeing it there ?!
Dougad50- Bronze Member
- Posts : 37
Join date : 2022-05-21
Location : Indianapolis area
Re: Just finished rebuilding and restoring Cox 190-8 engine
The Cox funny cars I have have the ring with lever but the Dragster I have have just the 2 hole ring no leverdavidll1984 wrote:Very pretty, well placed in this box which highlights it I have a very similar one with the same throttle ring but the back plate was missing. Mine had a red plastic tip on the ring like a litle handle
Dougad50- Bronze Member
- Posts : 37
Join date : 2022-05-21
Location : Indianapolis area
Re: Just finished rebuilding and restoring Cox 190-8 engine
this is from the Cox Pinto funny car the throttle ring has the lever that goes into bottom of car into slide plate that when Chute comes out it pulls the lever and shuts Throttle downcrankbndr wrote:What model is it from? I don't recognize the throttle.
Dougad50- Bronze Member
- Posts : 37
Join date : 2022-05-21
Location : Indianapolis area
Dougad50- Bronze Member
- Posts : 37
Join date : 2022-05-21
Location : Indianapolis area
Restoring
I learned how to Chrome plastic from the owner of Ertel toy Company he was my Friend. The Chinese pushed him out of business with there cheap diecast toys. Killed the jobs in Dyersville Iowa
Dougad50- Bronze Member
- Posts : 37
Join date : 2022-05-21
Location : Indianapolis area
Re: Just finished rebuilding and restoring Cox 190-8 engine
Plating plastic a subject I would like to know more about I think you have to coat the plastic with a conductive paint then it's almost the same as chrome plating dipping in an electrolite solution
davidll1984- Diamond Member
- Posts : 2288
Join date : 2020-02-12
Age : 39
Location : shawinigan
Re: Just finished rebuilding and restoring Cox 190-8 engine
you prep them then paint them with lacquer the put in Vacuum Chamber that has pure aluminum strips that are attached to heating coils that melt the strips and with the part that has a Neg charge and the strips with a pos charge and no air in chamber when the strips melt they become vapor and attach to parts. This is the same way the coat CD disk andUV Sun glassesdavidll1984 wrote:Plating plastic a subject I would like to know more about I think you have to coat the plastic with a conductive paint then it's almost the same as chrome plating dipping in an electrolite solution
Dougad50- Bronze Member
- Posts : 37
Join date : 2022-05-21
Location : Indianapolis area
Re: Just finished rebuilding and restoring Cox 190-8 engine
Ha I knew that some kind of paint was used but I didn't know for the vacuum chamber and also the aluminum strips I suspected that current was being used but I didn't really know how
davidll1984- Diamond Member
- Posts : 2288
Join date : 2020-02-12
Age : 39
Location : shawinigan
Similar topics
» Time to submit August's COX ENGINE OF THE MONTH photos
» Cox tether car engines
» Restoring a rusty engine
» Bar-Clamp engine mount - Finished pictures
» Finished cleaning the chopper engine (baby bee)
» Cox tether car engines
» Restoring a rusty engine
» Bar-Clamp engine mount - Finished pictures
» Finished cleaning the chopper engine (baby bee)
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum