Log in
Search
Latest topics
» Here we go again... another Lawn-Boyby rsv1cox Today at 6:50 am
» Norvel Needle Needed
by Greenman38633 Today at 4:02 am
» A prototype Cox Reed-valve marine engine
by roddie Yesterday at 11:51 pm
» My Cox .049 Marine inboard engine
by 1/2A Nut Yesterday at 11:41 pm
» Jim Walker Firebaby
by rsv1cox Yesterday at 7:26 pm
» Roddie-Rigger.. a 2005 original design
by roddie Yesterday at 7:04 pm
» music vids.. some of your favorites
by HalfaDave Yesterday at 6:55 pm
» World's largest weathervane
by Cox International Yesterday at 3:38 pm
» Help Pee Wee tank cap .020
by rdw777 Yesterday at 1:30 pm
» **VOTE-ON-THE-NEXT-COX-ENGINE-OF-THE-MONTH** (May 2024)
by GallopingGhostler Yesterday at 11:34 am
» Revivng Some Childhood Classics
by getback Yesterday at 8:21 am
» Jim Walkers FireBee - This is going to be fun
by rsv1cox Tue May 07, 2024 7:29 am
Cox Engine of The Month
The doorbell, a FedEx driver, and a very big box
Page 1 of 1
The doorbell, a FedEx driver, and a very big box
Nobody ever rings my door-bell always the breezeway or I leave the garage door open when expecting deliveries.
Opened the front door and there is this little girl with a ring in her nose with this great big package. Late teens early 20's maybe, the nose ring and covered with dust. Open van and West Virginia's country roads I suspect. Good for her, just a kid out of high-school doing it. Made me smile!
"Signature required sir." Reason for the door bell, she probably knocked on the breezeway door and I didn't hear her. Going a little deaf perhaps. Kid's would say - A LITTLE?
Dragged the box (also dusty) out to the garage and opened it - upside down.
No damage!
Opened the front door and there is this little girl with a ring in her nose with this great big package. Late teens early 20's maybe, the nose ring and covered with dust. Open van and West Virginia's country roads I suspect. Good for her, just a kid out of high-school doing it. Made me smile!
"Signature required sir." Reason for the door bell, she probably knocked on the breezeway door and I didn't hear her. Going a little deaf perhaps. Kid's would say - A LITTLE?
Dragged the box (also dusty) out to the garage and opened it - upside down.
No damage!
rsv1cox- Top Poster
-
Posts : 10608
Join date : 2014-08-18
Location : West Virginia
Kim- Top Poster
-
Posts : 8534
Join date : 2011-09-06
Location : South East Missouri
akjgardner- Diamond Member
-
Posts : 1474
Join date : 2014-12-28
Age : 64
Location : Greensberg Indiana
Re: The doorbell, a FedEx driver, and a very big box
I would richly tip even the devil himself if he delivered some COX stuff like that to my doorstep..
balogh- Top Poster
-
Posts : 4751
Join date : 2011-11-06
Age : 65
Location : Budapest Hungary
Re: The doorbell, a FedEx driver, and a very big box
Your making a nice collection of the TD series Bob….We always get to see and learn Cox
(and others) history from your projects…. A nice niche you have carved out
(and others) history from your projects…. A nice niche you have carved out
rdw777- Diamond Member
-
Posts : 1319
Join date : 2021-03-11
Location : West Texas
Re: The doorbell, a FedEx driver, and a very big box
Funny, the early models never interested me, now I'm all over them. They spent at least 70 years on my ignore list. Something old/new to explore.
Engine locked up, not from castor - factory preserve. A little MMO in each port loosened it. Needle unscrewed with some effort. My fear always leaving the tip of the needle inside the engine. Done that early on when I didn't use heat. Some MMO on the threads when I put it back in.
Still I took it apart. No way I'm removing the engine. I had so much trouble putting those little nuts back on when I did the first one.
Some diluted glass cleaner on a wet cotton cloth cleaned the fuselage. I let nothing touch that wing. Sparkles now. Someone tried to reglue the broken white Cox (not Kaysun) 6/3 with a glue, perhaps Formula 560 or Ambroid. I cleaned it off with a fingernail and some MMO. Also cleaned the faces with the wire wheel (Yeah, brutal) and cemented with Testors red tube. Decoration as originally supplied, not for use.
Poor picture, but no Z bend. Rather an up 30 degree and a 90 degree into the control horn. Interesting as the thin fuselage holds it in place.
Engine locked up, not from castor - factory preserve. A little MMO in each port loosened it. Needle unscrewed with some effort. My fear always leaving the tip of the needle inside the engine. Done that early on when I didn't use heat. Some MMO on the threads when I put it back in.
Still I took it apart. No way I'm removing the engine. I had so much trouble putting those little nuts back on when I did the first one.
Some diluted glass cleaner on a wet cotton cloth cleaned the fuselage. I let nothing touch that wing. Sparkles now. Someone tried to reglue the broken white Cox (not Kaysun) 6/3 with a glue, perhaps Formula 560 or Ambroid. I cleaned it off with a fingernail and some MMO. Also cleaned the faces with the wire wheel (Yeah, brutal) and cemented with Testors red tube. Decoration as originally supplied, not for use.
Poor picture, but no Z bend. Rather an up 30 degree and a 90 degree into the control horn. Interesting as the thin fuselage holds it in place.
rsv1cox- Top Poster
-
Posts : 10608
Join date : 2014-08-18
Location : West Virginia
Re: The doorbell, a FedEx driver, and a very big box
Hello Bob, I have been seeing your beautiful acquisitions, each one of the models are truly incredible pieces of history.
The TD-1 is really wonderful, very clean lines, really a beautiful model aircraft.
Congratulations!!
The TD-1 is really wonderful, very clean lines, really a beautiful model aircraft.
Congratulations!!
MauricioB- Top Poster
- Posts : 3589
Join date : 2016-02-16
Age : 53
Location : ARG
Re: The doorbell, a FedEx driver, and a very big box
Thanks Mauricio, one of my more interesting model acquisitions.
Came with an APC 6X4E prop. E must stand for extreme.
Cox supplied instructions. Got a kick out of reading them......Prop nut on the first sheet and Propeller must be installed backwards on the second. First sheet not insect eaten, just age. Seller included the broken off parts.
Cox also must have supplied it in a "knocked down" condition. I have their Aracobra like that, simple box with no decoration.
Best tail skid that I have seen. Spring steel snapped into place. Simple and indestructable. They also tried to color code their control handles to the model. Love the knuckle protector. I used to find them in multiple Cox parts buys and wondered where they came from.
And, think about getting those nuts on especially upper left. No lock washers either. Drove me nuts, and the Cox employees did it day after day. One finger on the nut, a hand holding the airplane and another hand on the engine and another hand with a screwdriver. Nutz!!!!!!
Came with an APC 6X4E prop. E must stand for extreme.
Cox supplied instructions. Got a kick out of reading them......Prop nut on the first sheet and Propeller must be installed backwards on the second. First sheet not insect eaten, just age. Seller included the broken off parts.
Cox also must have supplied it in a "knocked down" condition. I have their Aracobra like that, simple box with no decoration.
Best tail skid that I have seen. Spring steel snapped into place. Simple and indestructable. They also tried to color code their control handles to the model. Love the knuckle protector. I used to find them in multiple Cox parts buys and wondered where they came from.
And, think about getting those nuts on especially upper left. No lock washers either. Drove me nuts, and the Cox employees did it day after day. One finger on the nut, a hand holding the airplane and another hand on the engine and another hand with a screwdriver. Nutz!!!!!!
rsv1cox- Top Poster
-
Posts : 10608
Join date : 2014-08-18
Location : West Virginia
Re: The doorbell, a FedEx driver, and a very big box
That TD 1 is a thing of beauty, well done. I will see if I can find a prop in my stack of stuff.
crankbndr- Top Poster
- Posts : 3073
Join date : 2011-12-10
Location : Homestead FL
Re: The doorbell, a FedEx driver, and a very big box
crankbndr wrote:That TD 1 is a thing of beauty, well done. I will see if I can find a prop in my stack of stuff.
Thanks CB. That one is clearly marked Thimble Drome. I don't recall seeing any and at first thought maybe Cox bought them from Kaysun. They made many more in black in that style and those appear on some models that Make Boesen has........I think.
Bob
rsv1cox- Top Poster
-
Posts : 10608
Join date : 2014-08-18
Location : West Virginia
Re: The doorbell, a FedEx driver, and a very big box
Hi Bob, great looking airplanes, good for you! You're right, it's a lot of fun discovering new stuff.
The prop is an early Thimble-Drone prop, they started making their own in the late 50's, Not sure, i think black was the later props (you seen them on first run PT-19) new it could of been early white and later white was replacement prop.
The prop is an early Thimble-Drone prop, they started making their own in the late 50's, Not sure, i think black was the later props (you seen them on first run PT-19) new it could of been early white and later white was replacement prop.
Re: The doorbell, a FedEx driver, and a very big box
Thanks Mark, now I remember seeing those cards.
I made the mistake yesterday of grabbing that repaired prop by the broken end and broke it off again. This time I screwed it down and added elevation and left it to cure over-night. You can't rush Red tube. Display only!!
I stuck an early black one on for now replaced soon with the repaired white until something better comes along.
Accessories supplied for both TD-1 and TD-3 were very similar. Levent has given me a clean copy of the broken-up instructions that I will be printing out on yellow paper.
I made the mistake yesterday of grabbing that repaired prop by the broken end and broke it off again. This time I screwed it down and added elevation and left it to cure over-night. You can't rush Red tube. Display only!!
I stuck an early black one on for now replaced soon with the repaired white until something better comes along.
Accessories supplied for both TD-1 and TD-3 were very similar. Levent has given me a clean copy of the broken-up instructions that I will be printing out on yellow paper.
rsv1cox- Top Poster
-
Posts : 10608
Join date : 2014-08-18
Location : West Virginia
Re: The doorbell, a FedEx driver, and a very big box
hooray for FedEx gal delivering, working, and trying her best.
the first few times I saw the nose-ringed, funny hair, tattooed up kids, I was a bit irritated.
foolishly mentioned this irritation my kid sister, who nearly immediately replied in email with a photo of 19 yr old me, purple mohawk, earring, checkered vans shoes, and she said "we all did it in one way or another - celebrate that they are finding themselves"
so I try to be nicer about body mods.
thats one cool plane
the first few times I saw the nose-ringed, funny hair, tattooed up kids, I was a bit irritated.
foolishly mentioned this irritation my kid sister, who nearly immediately replied in email with a photo of 19 yr old me, purple mohawk, earring, checkered vans shoes, and she said "we all did it in one way or another - celebrate that they are finding themselves"
so I try to be nicer about body mods.
thats one cool plane
cstatman- Platinum Member
-
Posts : 536
Join date : 2021-02-17
Age : 59
Location : San Jose, CA
Re: The doorbell, a FedEx driver, and a very big box
Yes, I was proud of her, wanted to tell her so but thought it would be condescending. Little thing, maybe 5'2" carrying that big (but light) package. Heavy dust all over her.
Grabbed that prop the wrong again and broke it. I'll never learn.
This time I'm going to pin it.
Grabbed that prop the wrong again and broke it. I'll never learn.
This time I'm going to pin it.
rsv1cox- Top Poster
-
Posts : 10608
Join date : 2014-08-18
Location : West Virginia
Similar topics
» Roy Cox .045 "Special" arrives via FedEx
» FedEx, Fuji, and five days from Japan
» Glow Plug Igniter with CONSTANT CURRENT --Oz--
» My ball-driver set
» Cox La Cucaracha
» FedEx, Fuji, and five days from Japan
» Glow Plug Igniter with CONSTANT CURRENT --Oz--
» My ball-driver set
» Cox La Cucaracha
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum