Log in
Search
Latest topics
» TAPLIN TWIN 7ccmby grant.symes Today at 3:29 am
» A little nostalgia…
by roddie Today at 1:48 am
» **VOTE-ON-THE-NEXT-COX-ENGINE-OF-THE-MONTH** (May 2024)
by GallopingGhostler Today at 12:09 am
» Tired of it all…
by roddie Yesterday at 11:09 pm
» Roddie-Rigger.. a 2005 original design
by roddie Yesterday at 10:27 pm
» Science and Mechanics magazine's "Playboy" 14' plywood runabout plans.. circa 1950's
by roddie Yesterday at 9:30 pm
» My Cox .049 Marine inboard engine
by roddie Yesterday at 9:07 pm
» Ball - Socket Joints
by roddie Yesterday at 7:55 pm
» Post your Older books
by crankbndr Yesterday at 3:08 pm
» Cox wrench
by layback209 Yesterday at 3:03 pm
» Black Widow Run time
by getback Yesterday at 10:04 am
» How does your Garden Grow
by getback Yesterday at 6:26 am
Cox Engine of The Month
my custom 1/4a rc plane build log
Page 1 of 1
my custom 1/4a rc plane build log
well, i designed a rc airplane over a year ago for a cox .049 thats 18'' long (before i had a cox .020) this would be way over powered. The plane looks kinda like a FMK Flutterbug only smaller
pics to come soon
p.s im going to use the silver tank peewee .020 that i got from Cribbs74
pics to come soon
p.s im going to use the silver tank peewee .020 that i got from Cribbs74
mitchg95- Diamond Member
- Posts : 2103
Join date : 2011-12-19
Age : 28
Location : Geneva, mn, USA
mitchg95- Diamond Member
- Posts : 2103
Join date : 2011-12-19
Age : 28
Location : Geneva, mn, USA
Re: my custom 1/4a rc plane build log
Looks like your off to a good start. Stay the course Mitch!!!!
Cribbs74- Moderator
-
Posts : 11895
Join date : 2011-10-24
Age : 50
Location : Tuttle, OK
Re: my custom 1/4a rc plane build log
will do Ron, im thinking i might build another as a free flight for the OK cub co2 engine that i got today
mitchg95- Diamond Member
- Posts : 2103
Join date : 2011-12-19
Age : 28
Location : Geneva, mn, USA
mitchg95- Diamond Member
- Posts : 2103
Join date : 2011-12-19
Age : 28
Location : Geneva, mn, USA
mitchg95- Diamond Member
- Posts : 2103
Join date : 2011-12-19
Age : 28
Location : Geneva, mn, USA
Re: my custom 1/4a rc plane build log
ya man, still wondering what color scheme i wanna do.
Im thinking Black and red stripes like one would see on a Piper Super Cub on the wing and the fuselage might have a black top and bottom with red sides
i still have to find the wing rib design that i want to use, the chord is 4''
Im thinking Black and red stripes like one would see on a Piper Super Cub on the wing and the fuselage might have a black top and bottom with red sides
i still have to find the wing rib design that i want to use, the chord is 4''
mitchg95- Diamond Member
- Posts : 2103
Join date : 2011-12-19
Age : 28
Location : Geneva, mn, USA
mitchg95- Diamond Member
- Posts : 2103
Join date : 2011-12-19
Age : 28
Location : Geneva, mn, USA
Re: my custom 1/4a rc plane build log
thanks man
mitchg95- Diamond Member
- Posts : 2103
Join date : 2011-12-19
Age : 28
Location : Geneva, mn, USA
mitchg95- Diamond Member
- Posts : 2103
Join date : 2011-12-19
Age : 28
Location : Geneva, mn, USA
The airframe is finished!!!!!
got the airframe finished last night at 1:30am here are some pics
found one MAJOR design flaw , with the set up i have i will not be able to remove the spent co-2 cartridge without removing the motor from the motor mount do to space limitations
other than that i still need a 4'' chord for the wind and a rib design that works (i already have the wing designed) and i need to design the elevator and rudder
found one MAJOR design flaw , with the set up i have i will not be able to remove the spent co-2 cartridge without removing the motor from the motor mount do to space limitations
other than that i still need a 4'' chord for the wind and a rib design that works (i already have the wing designed) and i need to design the elevator and rudder
mitchg95- Diamond Member
- Posts : 2103
Join date : 2011-12-19
Age : 28
Location : Geneva, mn, USA
Re: my custom 1/4a rc plane build log
my uncle took a close look at the prop, and he thinks it was hand carved
is there anyway to be sure? it is 7'' in diameter
is there anyway to be sure? it is 7'' in diameter
mitchg95- Diamond Member
- Posts : 2103
Join date : 2011-12-19
Age : 28
Location : Geneva, mn, USA
Re: my custom 1/4a rc plane build log
May I ask why you didn't want to make a hatch for simple holder removal?
KP
KP
kpriddle- Bronze Member
- Posts : 35
Join date : 2012-05-29
Location : Maine
Re: my custom 1/4a rc plane build log
mitchg95 wrote:my uncle took a close look at the prop, and he thinks it was hand carved
is there anyway to be sure? it is 7'' in diameter
Believe me it's not...it wouldn't hurt to clean it up with some fine sandpaper and rebalance it. You might look to access the cylinder from the bottom, couple 'rare earth' magnets to hold hatch in place, good luck
Re: my custom 1/4a rc plane build log
kpriddle wrote:May I ask why you didn't want to make a hatch for simple holder removal?
KP
i did not think far enough ahead
did not realize it until it was to late
mitchg95- Diamond Member
- Posts : 2103
Join date : 2011-12-19
Age : 28
Location : Geneva, mn, USA
Re: my custom 1/4a rc plane build log
yesterday when i was in the car going to get more balsa for another plane, i stuck the plane out the window as the driver eased the speed to 40mph
the motor looked so cool turning over
i had a great experience at another lhs. The people that worked there had never seen a motor like this and they even got the manager to come out and look, they told me to keep building and that it is a art that not many kids my age do and that its mostly the "old timers'' (there words) that build anymore
the motor looked so cool turning over
i had a great experience at another lhs. The people that worked there had never seen a motor like this and they even got the manager to come out and look, they told me to keep building and that it is a art that not many kids my age do and that its mostly the "old timers'' (there words) that build anymore
mitchg95- Diamond Member
- Posts : 2103
Join date : 2011-12-19
Age : 28
Location : Geneva, mn, USA
Similar topics
» dolar store electric control line plane build
» Guillows Cessna 150 build circa 1970 (Build Log)
» 3mm depron plane plans
» How to design and build a model plane from corflute.
» My Never Ending Quest to build a plane I don’t care if I crash.
» Guillows Cessna 150 build circa 1970 (Build Log)
» 3mm depron plane plans
» How to design and build a model plane from corflute.
» My Never Ending Quest to build a plane I don’t care if I crash.
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum