Log in
Search
Latest topics
» Jim Walkers FireBee - This is going to be funby MauricioB Today at 8:05 am
» **VOTE-ON-THE-NEXT-COX-ENGINE-OF-THE-MONTH** (May 2024)
by MauricioB Today at 7:39 am
» My Cox .049 Marine inboard engine
by 1/2A Nut Today at 2:52 am
» WHO NEEDS TANKS!!!?? Perfect Brand Tanks For Sale
by DanMc Yesterday at 9:07 pm
» A prototype Cox Reed-valve marine engine
by roddie Yesterday at 9:02 pm
» Piston to Cylinder - what's a good fit, what's bad?
by mike in SC Yesterday at 7:42 pm
» Jim Walker Firebaby
by rsv1cox Yesterday at 7:09 pm
» Roddie's water-cooling bottle for bench-running
by roddie Yesterday at 5:13 pm
» Cox powered jet-pump for model Sprint Boat
by roddie Yesterday at 2:51 pm
» Fox .35 Modifications
by Onelife Yesterday at 2:07 pm
» Prop Rod - resto to a runner
by cstatman Yesterday at 2:03 pm
» Revivng Some Childhood Classics
by GTO455 Yesterday at 2:01 pm
Tyvek hinges??
Page 1 of 1
Tyvek hinges??
Hi guys! I've tried floppy disk hinges. They work well, but couldn't handle the hard landings over and over again (well, crashes really). My sewn hinges hold up really well, but they do look Frankenstein-ish. Of course, I should learn to sew smaller hinges and crash less. But where is the fun in that?
So that leads me to Tyvek hinges. I can buy a suit for a lifetime of hinges for all of us, or rob the PO for an envelope.
My two questions related to the material:
What glue works with it?
Will old school butyrate dope stick to it?
It sure feels like white Teflon when I look at samples!
Thanks for your sage advice, and experiences with this stuff.
Jim in MS
So that leads me to Tyvek hinges. I can buy a suit for a lifetime of hinges for all of us, or rob the PO for an envelope.
My two questions related to the material:
What glue works with it?
Will old school butyrate dope stick to it?
It sure feels like white Teflon when I look at samples!
Thanks for your sage advice, and experiences with this stuff.
Jim in MS
944_Jim- Diamond Member
-
Posts : 1960
Join date : 2017-02-08
Age : 59
Location : NE MS
Re: Tyvek hinges??
What about radio south CA hinges? Thin and can be cut to size for smaller applications.
Jason_WI- Top Poster
-
Posts : 3123
Join date : 2011-10-09
Age : 48
Location : Neenah, WI
Re: Tyvek hinges??
Mmmm. Never heard of them. I'll go look.
Thanks.
Thanks.
944_Jim- Diamond Member
-
Posts : 1960
Join date : 2017-02-08
Age : 59
Location : NE MS
Jason_WI- Top Poster
-
Posts : 3123
Join date : 2011-10-09
Age : 48
Location : Neenah, WI
Re: Tyvek hinges??
Cut them in half, length wise for 1/2a, I've used this type of hinge for years, also nip corner off at 45 to help with installation
Re: Tyvek hinges??
Jason_WI wrote:What about radio south CA hinges? Thin and can be cut to size for smaller applications.
I use hinges like that exclusively (not this particular brand, but ones like these). I have never had a hinge fail on me. They can be easily installed in balsa down to 2mm thick. They're tricky on 1.5mm balsa.
dirk gently- Gold Member
- Posts : 429
Join date : 2012-02-03
Age : 41
Location : Poznań
Re: Tyvek hinges??
944_Jim wrote:What glue works with it?
Jim in MS
Try to rough Tyvek with fine sandpaper, then use CA.
Levent Suberk- Diamond Member
- Posts : 2204
Join date : 2017-12-24
Location : Türkiye
Re: Tyvek hinges??
I cut them in half for 1/2A, rough them up a bit before gluing and round the ends up a bit like Mark says. I use thin Flexible CA for gluing them, perfect combo. I'm pretty sure it's a Bob Smith product, Brodak has it.
Dave P.- Gold Member
- Posts : 477
Join date : 2017-07-31
Age : 66
Location : Durham, NC
Dave P.- Gold Member
- Posts : 477
Join date : 2017-07-31
Age : 66
Location : Durham, NC
Re: Tyvek hinges??
No need for flexible cyano for hinges, better with thin CA glue with Tyvek , I don't sand them just use the cyano and never had one fail ever.
Re: Tyvek hinges??
Tyvek is rather adhesive friendly. Pva like Elmers school glue sticks better than material strength even. House wrap is a different product from envelopes. The envelopes have some type of coating or something. Test before use.
Phil
Phil
pkrankow- Top Poster
- Posts : 3025
Join date : 2012-10-02
Location : Ohio
Re: Tyvek hinges??
So avoid the envelope, and chase a strip of house wrap?
944_Jim- Diamond Member
-
Posts : 1960
Join date : 2017-02-08
Age : 59
Location : NE MS
Re: Tyvek hinges??
I did a test surface a few years back with PO tyvek and thin CA. Mine failed my pull test. I have used floppy disk mylar successfully on .010 and .020 RC planes but they have their limits on adhesion. I have had them knock loose during crashes but they have never failed in flight so far. For .049 and larger powered planes, I've resumed using cut-down standard CA hinges and thin CA again. No failures so far!
Tee Bee- Platinum Member
- Posts : 763
Join date : 2011-08-25
Location : Angleton, TX
Re: Tyvek hinges??
Pm me your address and I will post you an envelope full. You can compare.
Phil
Phil
pkrankow- Top Poster
- Posts : 3025
Join date : 2012-10-02
Location : Ohio
Similar topics
» Stitched Hinges, "Z" Hinges, and Other Old School / New School Tips
» A Quick and Dirty CA Hinge Installation
» cloth hinges
» Sig easy hinges
» Monokote Hinges?
» A Quick and Dirty CA Hinge Installation
» cloth hinges
» Sig easy hinges
» Monokote Hinges?
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum