Log in
Search
Latest topics
» WenMac 049 - Glow Plug & Head Gasket replacements?by Ken Cook Today at 8:06 am
» Prop Rod - resto to a runner
by rsv1cox Today at 7:32 am
» A choke-tube with velocity-stack configured Bee
by roddie Today at 6:12 am
» Jim Walkers FireBee - This is going to be fun
by cstatman Yesterday at 6:58 pm
» Hawk had breakfast and then took a bath
by rdw777 Yesterday at 5:38 pm
» Jim Walker Firebaby
by rdw777 Yesterday at 4:58 pm
» Nostalgia alert, my 1959 Corvette revisited
by rsv1cox Yesterday at 2:25 pm
» Prayers for my Wife Please
by akjgardner Yesterday at 10:28 am
» Cox prop rod
by Wiggy Fri May 17, 2024 4:30 pm
» "Red Neck" .049 elec. starter
by getback Fri May 17, 2024 7:19 am
» Cox prop rod
by Wiggy Fri May 17, 2024 5:35 am
» Looking For Comet Tri-Pacer
by latole Fri May 17, 2024 3:45 am
Got one running!
Page 1 of 1
Got one running!
I picked this Tee Dee .020 for first gas engine run in over twenty years..... I bought it in 1974 from America’s Hobby Center.... I was 16 at the time....
I disassembled and cleaned it good using lots of tips I learned on the CEF! My shop smells like Hoppes # 9 now Cobbled up a crankcase gasket, Used two head gaskets on Glow plug boy 24. Used a Cox black 4.5-2 prop (little scary, they are old) and ran rich for most of the run before leaning out a couple of short times. My tach showed 18.5 K and would hold that steady when leaned out.
Need to order the right gaskets, Screw to accommodate the the spinner, new props etc.
Still taking inventory for the reed.049’s for parts too....I’m just glad parts are available!
Fabulous to hear this thing scream again.... Some of the neighbors came over to see what the commotion was lol....Fun evening!
rdw777- Diamond Member
-
Posts : 1348
Join date : 2021-03-11
Location : West Texas
Re: Got one running!
Better to have curious neighbors instead of angry ones! Glad you got it going after so long. You bought that engine the year I was born!
Cribbs74- Moderator
-
Posts : 11899
Join date : 2011-10-24
Age : 50
Location : Tuttle, OK
Re: Got one running!
Looks like fun. I like seeing all that castor goo all over an engine. Tomorrow, weather permitting, I will have my day....
NEW222- Top Poster
- Posts : 3892
Join date : 2011-08-13
Age : 45
Location : oakbank, mb
Re: Got one running!
Cool how these little jewels can bring back such fond childhood memories
fredvon4- Top Poster
-
Posts : 4002
Join date : 2011-08-26
Age : 68
Location : Lampasas Texas
Re: Got one running!
Thanks for the encouragement guys, I’ll be running it some more in the future....
Can I trust the Cox black plastic props that are 20 plus years old? .... I flexed them and did not see any evidence of cracking..... I’ve read in the past that boiling may help but I really don’t know what that would accomplish.... Not a problem to order some new ones, Will just have to wait awhile.... Need to come up with a balancer too....
I had left the cylinder and head loose until just before starting....I didn’t want to stick the wrench across the ports so I snugged the cylinder with a piece of leather strap from an old belt using fingers only (learned here on CEF ).... Snugged the head with the wrench..... After running, the head came off easy but couldn’t undo the cylinder.... Couldn’t get a good enough grip and the strap kept slipping.... I finally wrapped a #32 rubber band tightly around the cylinder with several loops, Then the leather could get a good bite and rubber grabbed the cylinder and was able to pop it off..... Maybe someone could use this down the road sometime
Can I trust the Cox black plastic props that are 20 plus years old? .... I flexed them and did not see any evidence of cracking..... I’ve read in the past that boiling may help but I really don’t know what that would accomplish.... Not a problem to order some new ones, Will just have to wait awhile.... Need to come up with a balancer too....
I had left the cylinder and head loose until just before starting....I didn’t want to stick the wrench across the ports so I snugged the cylinder with a piece of leather strap from an old belt using fingers only (learned here on CEF ).... Snugged the head with the wrench..... After running, the head came off easy but couldn’t undo the cylinder.... Couldn’t get a good enough grip and the strap kept slipping.... I finally wrapped a #32 rubber band tightly around the cylinder with several loops, Then the leather could get a good bite and rubber grabbed the cylinder and was able to pop it off..... Maybe someone could use this down the road sometime
rdw777- Diamond Member
-
Posts : 1348
Join date : 2021-03-11
Location : West Texas
Re: Got one running!
rdw777 wrote:Thanks for the encouragement guys, I’ll be running it some more in the future....
Can I trust the Cox black plastic props that are 20 plus years old? .... I flexed them and did not see any evidence of cracking..... I’ve read in the past that boiling may help but I really don’t know what that would accomplish.... Not a problem to order some new ones, Will just have to wait awhile.... Need to come up with a balancer too....
I had left the cylinder and head loose until just before starting....I didn’t want to stick the wrench across the ports so I snugged the cylinder with a piece of leather strap from an old belt using fingers only (learned here on CEF ).... Snugged the head with the wrench..... After running, the head came off easy but couldn’t undo the cylinder.... Couldn’t get a good enough grip and the strap kept slipping.... I finally wrapped a #32 rubber band tightly around the cylinder with several loops, Then the leather could get a good bite and rubber grabbed the cylinder and was able to pop it off..... Maybe someone could use this down the road sometime
Good tip. If you dampen the leather then it bites the fins of cylinder.
Levent Suberk- Diamond Member
- Posts : 2206
Join date : 2017-12-24
Location : Türkiye
Re: Got one running!
Way to go RDW777 first run after many years like icing on the cake ,, I have only heard of the white porps being a problem >> boiling for a few mins. brings back the flexibility called conditioning << But if i were you go ahead and order some new ones, and Keep your face away from being in line with rotating prop
getback- Top Poster
-
Posts : 10167
Join date : 2013-01-18
Age : 66
Location : julian , NC
Re: Got one running!
YEAH MAN!!!!!!!! SUPER CONGRATS!!!!!
--------ON GETTING THAT TINY CASTOR SLINGER SINGING & MEMORIES IT BROUGHT-----
Both equally important in my book!!!!
--------ON GETTING THAT TINY CASTOR SLINGER SINGING & MEMORIES IT BROUGHT-----
Both equally important in my book!!!!
Kim- Top Poster
-
Posts : 8537
Join date : 2011-09-06
Location : South East Missouri
Similar topics
» RUNNING the Cox 140
» TD not really running....
» Running one of my TD .09's
» .020 pee wee running
» 010 running
» TD not really running....
» Running one of my TD .09's
» .020 pee wee running
» 010 running
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum