Log in
Search
Latest topics
» Looking For Comet Tri-Pacerby DanMc Yesterday at 7:25 pm
» "Red Neck" .049 elec. starter
by 944_Jim Yesterday at 7:04 pm
» Cox AT-6 Texan repaint.....Pretty nice
by 944_Jim Yesterday at 4:31 pm
» Prayers for my Wife Please
by balogh Yesterday at 4:08 pm
» Jim Walkers FireBee - This is going to be fun
by rdw777 Yesterday at 3:58 pm
» Hawk had breakfast and then took a bath
by rdw777 Yesterday at 3:46 pm
» Roddie's water-cooling bottle for bench-running
by roddie Yesterday at 3:07 pm
» Removing old decals
by latole Yesterday at 3:06 pm
» Prop Rod - resto to a runner
by rsv1cox Yesterday at 2:29 pm
» Cox Ryan ST 2.0
by 944_Jim Yesterday at 11:52 am
» Blue backplate postage stamp engine
by getback Yesterday at 6:46 am
» COX Postage Stamp engine -Babe Bee & Horseshoe Backplate adapters
by GallopingGhostler Yesterday at 6:33 am
building plans are good
Page 1 of 1
building plans are good
thanks for the o so quick responce on the barnstormer plans site these babys need some friends. big swap meet coming up the 16th tring to save some money up. ebay just helped me out 049 medallion used 35.00/// golden bee , baby bee ? enya 15 some wrenches and props for45.00 waiting on ship now . and the old ones i got running are ready thanks to uallhhttps://i.servimg.com/u/f71/18/06/36/59/00314.jpgttp://i71.servimg.com/u/f71/18/06/36/59/00313.jpg you all must know i am not getting it or something is wrong with my setup to send pic s any way nuff time here for now!!
getback- Top Poster
-
Posts : 10159
Join date : 2013-01-18
Age : 66
Location : julian , NC
Re: building plans are good
Fixing some links
https://servimg.com/u/f71/18/06/36/59/00314.jpg
https://servimg.com/u/f71/18/06/36/59/00313.jpg
The links ended up overlapped. Put each link on a separate line.
Nice looking planes. The slab wing plane looks like someone's first airplane, and possibly decorated as a pre-teen. Hopefully there is a reasonable number of layers of paint on it. My first plane I repainted time and time again while Mom was repairing Dad's control line combat planes. It quickly became too heavy to fly!
The wing looks pretty good too. I would repair the elevator by scabbing a piece in that was matched off the other corner. Cut the break clean so the scab can be glued in neat. I have done this several times on other planes. I would finish stripping the coating as best as possible, not worrying about the silk and dope stuck to the ribs IF it is only one layer, lightly sand, then cover with a plastic film covering and get flying.
I recommend you trace the rib on the wing accurately before covering it. If you need to make repairs having the pattern helps.
Phil
https://servimg.com/u/f71/18/06/36/59/00314.jpg
https://servimg.com/u/f71/18/06/36/59/00313.jpg
The links ended up overlapped. Put each link on a separate line.
Nice looking planes. The slab wing plane looks like someone's first airplane, and possibly decorated as a pre-teen. Hopefully there is a reasonable number of layers of paint on it. My first plane I repainted time and time again while Mom was repairing Dad's control line combat planes. It quickly became too heavy to fly!
The wing looks pretty good too. I would repair the elevator by scabbing a piece in that was matched off the other corner. Cut the break clean so the scab can be glued in neat. I have done this several times on other planes. I would finish stripping the coating as best as possible, not worrying about the silk and dope stuck to the ribs IF it is only one layer, lightly sand, then cover with a plastic film covering and get flying.
I recommend you trace the rib on the wing accurately before covering it. If you need to make repairs having the pattern helps.
Phil
pkrankow- Top Poster
- Posts : 3025
Join date : 2012-10-02
Location : Ohio
Similar topics
» Cox Powered Tether Pole Hovercraft - Plans Now In Building Plans
» Plans for building
» Uploading Building Plans?
» The Brand New Building Plans Section!
» Scratch building a new plane - without plans, just an idea
» Plans for building
» Uploading Building Plans?
» The Brand New Building Plans Section!
» Scratch building a new plane - without plans, just an idea
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum