Log in
Search
Latest topics
» Prayers for my Wife Please by GallopingGhostler Today at 1:59 am
» Cox Ryan ST 2.0
by GallopingGhostler Today at 1:42 am
» Looking For Comet Tri-Pacer
by DanMc Yesterday at 7:25 pm
» "Red Neck" .049 elec. starter
by 944_Jim Yesterday at 7:04 pm
» Cox AT-6 Texan repaint.....Pretty nice
by 944_Jim Yesterday at 4:31 pm
» Jim Walkers FireBee - This is going to be fun
by rdw777 Yesterday at 3:58 pm
» Hawk had breakfast and then took a bath
by rdw777 Yesterday at 3:46 pm
» Roddie's water-cooling bottle for bench-running
by roddie Yesterday at 3:07 pm
» Removing old decals
by latole Yesterday at 3:06 pm
» Prop Rod - resto to a runner
by rsv1cox Yesterday at 2:29 pm
» Blue backplate postage stamp engine
by getback Yesterday at 6:46 am
» COX Postage Stamp engine -Babe Bee & Horseshoe Backplate adapters
by GallopingGhostler Yesterday at 6:33 am
My Roger Harris Handles / Wheels
Page 1 of 1
My Roger Harris Handles / Wheels
Got my order yesterday and am Very Happy with them !! yet the laser cut is a little crud the handles will need some light sanding around to keep the spider line from snagging , but that's no biggie ( I feel like I got a collectors item ) also got a maybe proto type of a nice clear handle but it had a problem getting here and has a broken place in it I think I can fix it with a pin and glue repair , but it is a more brittle material I am guessing .. Slide Show The Baby Clown is getting some this action . Thank You Roger . Eric
getback- Top Poster
-
Posts : 10159
Join date : 2013-01-18
Age : 66
Location : julian , NC
Re: My Roger Harris Handles / Wheels
good to see you got everything. i have gone through and thickened up the clear handle file in areas that i felt need to be thicker since cutting the first couple. maybe i will add a bit more material....
the black delrin is tough stuff to cut especially at 1/4" thick. it requires multiple passes to get through it without melting and charring. this is why the edge is not nicer. the only thing i did was hit all the wholes with a counter sink to chamfer the edges. you can see how much nicer the acrylic cuts. single pass and a nice polished edge. i will send you a couple more clear ones once i am happy with the result.
the black delrin is tough stuff to cut especially at 1/4" thick. it requires multiple passes to get through it without melting and charring. this is why the edge is not nicer. the only thing i did was hit all the wholes with a counter sink to chamfer the edges. you can see how much nicer the acrylic cuts. single pass and a nice polished edge. i will send you a couple more clear ones once i am happy with the result.
rogermharris- Platinum Member
- Posts : 503
Join date : 2015-03-17
Age : 61
Location : Long Branch, New Jersey
Re: My Roger Harris Handles / Wheels
Roger That was a Freebie the way I see It and you don't have to do that , but they are Nice ! Thanks , Eric
getback- Top Poster
-
Posts : 10159
Join date : 2013-01-18
Age : 66
Location : julian , NC
Re: My Roger Harris Handles / Wheels
getback wrote:Roger That was a Freebie the way I see It and you don't have to do that , but they are Nice ! Thanks , Eric
yea.. i tossed it in. since it broke, i will send you the next version. i think the clear ones look cool
working on my stunt trainer design at the moment
rogermharris- Platinum Member
- Posts : 503
Join date : 2015-03-17
Age : 61
Location : Long Branch, New Jersey
Similar topics
» Roger Harris flys again
» Happy Birthday Roger Harris!
» Fly A Thon Roger Harris Beginner Ringmaster Bipe
» Flying at the churchyard - The Roger Harris Micro Ringmaster
» Lunch Time Laser'in
» Happy Birthday Roger Harris!
» Fly A Thon Roger Harris Beginner Ringmaster Bipe
» Flying at the churchyard - The Roger Harris Micro Ringmaster
» Lunch Time Laser'in
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum