Log in
Search
Latest topics
» Cox AT-6 Texan repaint.....Pretty niceby 944_Jim Today at 4:31 pm
» Prayers for my Wife Please
by balogh Today at 4:08 pm
» Jim Walkers FireBee - This is going to be fun
by rdw777 Today at 3:58 pm
» Hawk had breakfast and then took a bath
by rdw777 Today at 3:46 pm
» Looking For Comet Tri-Pacer
by latole Today at 3:11 pm
» Roddie's water-cooling bottle for bench-running
by roddie Today at 3:07 pm
» Removing old decals
by latole Today at 3:06 pm
» Prop Rod - resto to a runner
by rsv1cox Today at 2:29 pm
» Cox Ryan ST 2.0
by 944_Jim Today at 11:52 am
» Blue backplate postage stamp engine
by getback Today at 6:46 am
» COX Postage Stamp engine -Babe Bee & Horseshoe Backplate adapters
by GallopingGhostler Today at 6:33 am
» Jim Walker Firebaby
by rsv1cox Yesterday at 12:24 pm
Simple Centering Tool for Fishing Line Hinges
Page 1 of 1
Simple Centering Tool for Fishing Line Hinges
Simple centering jig for fishing line hinges. I took a sturdy non flexible plastic lid. The top of lid is flat and about 1/16 ins thick. I draw a line at center and drill three holes with a 0.5 mm drill bit. Inserted two thumb tack and epoxied from inside. Inside of lid can also be filled with epoxy. Checked the center hole with a ruler. Jig is ready.
Last edited by Levent Suberk on Wed Sep 21, 2022 7:52 am; edited 1 time in total
Levent Suberk- Diamond Member
- Posts : 2205
Join date : 2017-12-24
Location : Türkiye
Levent Suberk- Diamond Member
- Posts : 2205
Join date : 2017-12-24
Location : Türkiye
Re: Simple Centering Tool for Fishing Line Hinges
Very nice job. As I've posted in different posts in the past, I am a fan of centering tools. This is about the neatest home brew tool yet.
The Off Center Mark
The Off Center Mark
batjac- Diamond Member
-
Posts : 2338
Join date : 2013-05-22
Age : 61
Location : Broken Arrow, OK, USA
Re: Simple Centering Tool for Fishing Line Hinges
Nice great and easy design. I remember waiting to hear back from or about another centering tool, but have unfortunately not heard back yet. I personally like the ease and simplicity of your design!
NEW222- Top Poster
- Posts : 3892
Join date : 2011-08-13
Age : 45
Location : oakbank, mb
Similar topics
» fishing line to use for control line
» Making a Simple Tool for Cox Engines
» Stitched Hinges, "Z" Hinges, and Other Old School / New School Tips
» A Quick and Dirty CA Hinge Installation
» spektrum DX5e, adjustable travel and centering.
» Making a Simple Tool for Cox Engines
» Stitched Hinges, "Z" Hinges, and Other Old School / New School Tips
» A Quick and Dirty CA Hinge Installation
» spektrum DX5e, adjustable travel and centering.
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum