Log in
Search
Latest topics
» Prayers for my Wife Please by rsv1cox Today at 12:14 pm
» Cox Ryan ST 2.0
by 944_Jim Today at 11:52 am
» Hawk had breakfast and then took a bath
by rsv1cox Today at 9:38 am
» Blue backplate postage stamp engine
by getback Today at 6:46 am
» COX Postage Stamp engine -Babe Bee & Horseshoe Backplate adapters
by GallopingGhostler Today at 6:33 am
» Jim Walkers FireBee - This is going to be fun
by rsv1cox Yesterday at 3:45 pm
» Prop Rod - resto to a runner
by rsv1cox Yesterday at 12:41 pm
» Jim Walker Firebaby
by rsv1cox Yesterday at 12:24 pm
» Internet buy
by Ken Cook Yesterday at 9:15 am
» Artwork for Otto Kuhni
by GallopingGhostler Yesterday at 8:26 am
» Sherline lathe wont run
by getback Yesterday at 7:15 am
» Roddie's water-cooling bottle for bench-running
by roddie Tue May 14, 2024 7:38 pm
DART- TD .09
Page 4 of 4
Page 4 of 4 • 1, 2, 3, 4
Re: DART- TD .09
Rigger engine break in during the last of the 3rd 2oz tank I brought up the rpm some
to see what it would do on the pipe NV was rich but lean enough to get 44,412 rpm!
Should do about 46k+ once closer to the sweet spot will post a running vid soon.
Maiden run will be rich by about 5 clicks off peak.
Published on Oct 2, 2016
Outrigger - Picco .85cc /.0519ci / Profi Tuned Pipe 44,412 rpm
Original designed outrigger hydro for Picco P-Zero
On the end of the 3rd tank I was able to lean it out enough
to get a idea of the top end still rich but on the pipe
should do about 46k no load once the needle is set.
30% nitro 18% castor Will post a maiden launch vid
perhaps next weekend.
to see what it would do on the pipe NV was rich but lean enough to get 44,412 rpm!
Should do about 46k+ once closer to the sweet spot will post a running vid soon.
Maiden run will be rich by about 5 clicks off peak.
Published on Oct 2, 2016
Outrigger - Picco .85cc /.0519ci / Profi Tuned Pipe 44,412 rpm
Original designed outrigger hydro for Picco P-Zero
On the end of the 3rd tank I was able to lean it out enough
to get a idea of the top end still rich but on the pipe
should do about 46k no load once the needle is set.
30% nitro 18% castor Will post a maiden launch vid
perhaps next weekend.
1/2A Nut- Top Poster
- Posts : 3442
Join date : 2013-10-20
Age : 60
Location : Brad in Texas
Re: DART- TD .09
Here is the running vid of the maiden voyage I had too much prop on
the tail so the engine lost more rpm than I had wished, goal is 37k passes
current best pass 28k. All the same fun 1/2A project and the first posted
vid of a outrigger hydro running on a 1/2A engine in North America.
https://www.youtube.com/watch?v=Gv7EUv6yfvs
Published on Oct 9, 2016
1st Run - Picco P-Zero Outrigger Hydro Profi Tuned Pipe
.85cc / .05 ci / 1/2A car engine converted for boat use.
Very stable, needle valve set a bit rich for the first few
runs, need to lower the strut a bit, tracks very well.
Will do another vid after I tweak the setup.
Stock X427 / 20% castor 30% Nitro. Per Doppler
reading best pass 62.25 Kph or 38.68 mph.
the tail so the engine lost more rpm than I had wished, goal is 37k passes
current best pass 28k. All the same fun 1/2A project and the first posted
vid of a outrigger hydro running on a 1/2A engine in North America.
https://www.youtube.com/watch?v=Gv7EUv6yfvs
Published on Oct 9, 2016
1st Run - Picco P-Zero Outrigger Hydro Profi Tuned Pipe
.85cc / .05 ci / 1/2A car engine converted for boat use.
Very stable, needle valve set a bit rich for the first few
runs, need to lower the strut a bit, tracks very well.
Will do another vid after I tweak the setup.
Stock X427 / 20% castor 30% Nitro. Per Doppler
reading best pass 62.25 Kph or 38.68 mph.
1/2A Nut- Top Poster
- Posts : 3442
Join date : 2013-10-20
Age : 60
Location : Brad in Texas
Page 4 of 4 • 1, 2, 3, 4
Similar topics
» Albon Dart 0.5cc
» DC Dart 0.5cc Diesel
» DC Dart tank
» music vids.. some of your favorites
» Scientific Dart for the fleamarket McCoy
» DC Dart 0.5cc Diesel
» DC Dart tank
» music vids.. some of your favorites
» Scientific Dart for the fleamarket McCoy
Page 4 of 4
Permissions in this forum:
You cannot reply to topics in this forum